Announcement
Collapse
No announcement yet.
Maritime Skyline's aka Skytimers
Collapse
X
-
no..this is something recent..i was able to boost at a held 10pds...but not it seems to over boost..but this was just on a cruise through quispam tonight with the G/F that i noticed..so couldnt boost too much...but ill make sure to look tomorrow
Leave a comment:
-
lol yea my cars set up a little different the every1 else, my boost restrictor is gone, but im running 8 pounds, it will do the odd spike to 9-10 but haven't seen it yet on my gauge. my timing is really advanced so i get HORRIBLE fuel mileage and a LOT of backfiring and at the same time black smoke likes to pop out with some flames at night lol but i hit max torque at 3250rpm and i have stupid camber so my cars set up for cornering:drive:
Leave a comment:
-
nice..mine really pulls hard..the only thing I notice is in 2nd around 5500 to 6500, it kind of flatens. then takes of from there...but im over boosting quite a bit..if i have it set to 7.5(which i always run at) it boosts at 8.5-8.9, even after increasing my boost controller to 10 it still boosts around 9..so i need to check that out...and theres no problem with my gauges..because i have 3 different boost gauges..lol:drive:
Leave a comment:
-
wow im gone for a couple hours and i miss 2 pages of talk! haha and when ben said im being a whiner he meant my fan is stuck on so it sounds like its got a HUGE blower lol, as for nb's gts, HOLY ****! lol thing pulls harder then my gtr theres GOTTA be somethin up with that thing, we need to strap her down at dannys to see what its got lol and im always cruising around somewheres lol
Leave a comment:
-
We will have to go for a rip, for some reason there is NO slow point from 2000-7500 rpm. The damn thing just wants to go. Not sure if the triple plate clutch has something to do with it or not.
Leave a comment:
-
i wouldn't mind taking your gts for a quick spin sometime just to compar to mine. mine seems to go a little flat after it hits 5-6k. it feels like it wants to pull harder but feels like something is holding it back.Originally posted by nbskyline View PostAfter he got back from a drive, we had to take off the kick panel to check for an aftermerket ECU. It appears to be a stock ECU but it pulls hard all the way
Leave a comment:
-
After he got back from a drive, we had to take off the kick panel to check for an aftermerket ECU. It appears to be a stock ECU but it pulls hard all the way
Leave a comment:
-
nice...mines working really well now..since i got the turbo replaced...its awesome..now just to figure out all the settings on the rev/speed meter.
Leave a comment:

hahaha
Leave a comment: