front adjustable upper control arms Recommendation

[C-unit]

Does anyone know what's a good brand on front adjustable upper control arms for GTR?? I am looking at Nismo, Ikeya formular and Cusco but all of them are fixed length.

I am trying to stay JDM brand so is there any other recommendation???

Notes* KTS is not JDM to me...

[Daryl @ RightDrive]

KTS is not JDM? Then it is....?

Silk Road also makes a set of adjustable arms. Other than that there aren't too many others. Cusco arms come in various lengths, -10mm, -5mm, 0mm, and +5mm.

[Turismo]

not JDM but i installed a set of AMS in my car last night and they are excellent fit and very beefy.

[C-unit]

KTS is made out of taiwan....just like stir guages. branded in japan.

I was looking at ikeya formula Lower control arms and they are adjustable. Does anyone know if it is possible to get their fixed upper and able to adjust my camber through the lower control arms?????


Looks like the joint that connects to the body is adjustable to push the lower arm in and out.

[Super_Dude]

There is a reason the best brands upper arms arms are fixed. They are much stronger and the adjustable ones are prone to breaking.

If it's a street car your best bet it to get some whiteline camber bushes. you can do the outside and get -5mm or do both and get -10mm. Because they are bushings they won't break as quick and won't make noise or bind as bad as most aftermarket options.

I don't know if you looked at the price of the lower arms but they are very expensive. They are also not recommended because they mess up the rest of the geometry.

[tazsgtr]

not JDM but i installed a set of AMS in my car last night and they are excellent fit and very beefy.

How are they? I've had some concerns since the mounting bolts they send are small than the stock ones. Concerned about them being weaker and possibly breaking.

[mcfly]

Manatee makes some nice parts. at least the price says so, or should dictate that. Pictures look good.

unlike Ikeya they will be adjustable

[C-unit]

Manatee makes some nice parts. at least the price says so, or should dictate that. Pictures look good.

unlike Ikeya they will be adjustable

Is there any site or info about them?? I tried google but I come up with this:

[bignate]

+1 for the AMS ones, just installed them on my car. They are much better built than similar design front uppers. Their RUCAS are also very rugged. They have my vote, I'll have better feedback once I get my car setup and track with them.

[mcfly]

Is there any site or info about them?? I tried google but I come up with this:

greenline should still list them

[benk23]

i use bings adjustable FUCA and RUCA. i am very happy with the ease of installation, the quality, and the prices.

[C-unit]

I already have all SPL arms...but too bad they don't make any FUCA.

Superdude: I think I will figure out the Camber I want to run and buy the right length of the ikeya arms with the lower control arms. I dont think it will messed up the geometry but rather fixed the roll center after I lowered my car.