No-name greddy suction kit fitment?

[nimblestix]

Hey, im wondering if anyone here has fitted their r32 gtr with one of those no-name greddy suctions style kits that are sold on ebay.

Ive found a few for under $400 and want to know if its worth trying it out?

i know they are ment for r33's & r34's but from reading a while back i think there are people that claim its pretty simple to fit this kit to an r32.
Slight modification doesnt worry me.

just looking for a cheaper alternative to the $1200 greddy kit.

I would be swapping the cheap filters that come with it for my clean apexi filters.

For the record, i am looking at this kit because i like the way it looks mainly, but also i think it will help with 2860-5r shuffle if i decide to switch back to a maf controlled ecu from my current djetro setup.

Also are there any reasons you might suggest i not go with this kit?

Thanks!

Sent from my GT-I9000M using Tapatalk

[cschepp]

You can pick up a brand name one used for slightly more. I would just do that.

[nimblestix]

Ive been waiting for someone to sell one but no luck yet. Been waiting for quite some time now

Sent from my GT-I9000M using Tapatalk

[Daryl @ RightDrive]

There is a thread on here somewhere of someone that bought an Autobahn one and it fit terribly.

[gtrjon]

Ive been waiting for someone to sell one but no luck yet. Been waiting for quite some time now

Sent from my GT-I9000M using Tapatalk

hit up dylan im not sure if you know him or not but he bought one of the kits off ebay i think and he made it fit. didnt seem too bad. why did you switch back to mafs?

[nimblestix]

I havent switched yet, but im thinking about it. Dont like the chunky characteristics of the map controlled ecu. Afrs seem so random.

Sent from my GT-I9000M using Tapatalk

[NismoS-tune]

It's cheaper for a reason. If it doesn't fit, send it back. If it fits, just laugh at the guys like us who spend $1800 (HKS) on the real ones lol.

[markc32]

pipes with name or not theyre just pipes...make it fit and buy a good name filter

oem hoses are just rubber....rubber is rubber hahah

[C-unit]

oem hoses are just rubber....rubber is rubber hahah

No..not really. Apparently you haven't bought hoses for your RB before. All oem hoses uses different compound and layer in different areas of the engine.

To the OP, I would still give it a try and if you make it fit. Get new filters and better T-bolt clamps. If you need some help on welding and stuff, let me know. I can probably give you a hand since I am doing all the intercooler piping for my car right now.

[NismoS-tune]

So you can afford to run -5s (unless you're not using them to the full potential and should have went with smaller turbos) but a good suction kit is a tough call? OEM pipes work fine, get T bolt clamps. A good suction kit DOES NOT stop shuffle. I went all out on the best suction kit and I have shuffle with -5s. Single turbo is your best solution. Less weight, more power, less lag, less cost, less maintenance parts, no shuffle.

[gtrjon]

Single turbo is your best solution. Less weight, more power, less lag, less cost, less maintenance parts, no shuffle.

i dont know why most people dont understand this

[Dragon Humper]

Werd.........





Jon.

[nimblestix]

yo Charles we'll be in touch! Although I've got an ace in my sleeve that I'm keeping hush hush until its all sorted out. You may or may not know what I'm tallkng about, but regardless it will be epic!.

S tune I was under the impression that a quality suction kit does in fact help with shuffle perhaps I was mislead... however I not only wanted that kit to stop shuffle but I really like the asthetics that it adds to the engine bay!

There's got to be a way to cut down shuffle besides going single snail. There are some sick twin bulds I've read about in mags and on the internet that made me want to stay with twins.
Sent from my Galaxy Nexus using Tapatalk

[Super_Dude]

You can play with can timing and get rid of the shuffle on -5s. -10's your screwed.

as far as maf vs map is concerned, are you running a tps commpensated 4d map or running a pfc?

[nimblestix]

A pfc. When I purchased it I didn't do enough research on what my options were. If I knew then what I know now about layered trims I would have gone with a haltech or something of equal quality.

Sent from my Galaxy Nexus using Tapatalk