MWR34 It finally begins R34 Conversion Front/Rear

[BeeGTR]

Just found some gold that might help......

http://www.gtr.co.uk/forum/upload/63666-taff-tune-gts-r32-56k-huge-no-no.html

my new wet dream:hit_head:

[BeeGTR]

Hey did you buy that from DJAuto Imports?

Great build by the way, good luck!!

Yup, Thanks it's going to be a fun build.

I'll start a thread when I get back from vacation!:-D

[Velders]

I have the red R32BeeR in Edmonton

Hey did you buy that from DJAuto Imports?

Great build by the way, good luck!!

[mwracing]

Hey I just jumped into this thread. JDMCurt told me about it!

I have the red R32BeeR in Edmonton, and I'm in the process of doing a R34 tailight conversion myself! 3/4's of the work is already done cause of the kit, so it wont be too bad.

If your in the area, your more than welcome to come and take measurement....and if your real nice, It would be easy to make the jigs to hold up the front end off of mine, but I think the BeeR kit's front end is shaped differntly so it might not help. Mabey next week before I leave for vacation, I could throw up some pics if anyone wants.

For the tailights, Im going to cut off the top stock bracket from the R32 lights, cut into a bit of the body, mount the lights, cut the trunk and rear fiberglass panels to fit, then vola!!

For the fuel door, BeeR's kit leaves the stock one, and the panels are about an inch bigger. I've also dropped the stock fuel tank, and am going to cut the trunk out and make a fuel cell with built in diffusers. At the same time I'm going to cut in new rear brake ducks and vent them through the rear bumper.

I am giong to post everything when I'm done, I've been video tapeing the whole thing.

If you have any questions, I'll do my best to help

good work man. start a build thread. i was in edmonton on the weekend. visiting old friends and some shopping.

[BeeGTR]

Hey I just jumped into this thread. JDMCurt told me about it!

I have the red R32BeeR in Edmonton, and I'm in the process of doing a R34 tailight conversion myself! 3/4's of the work is already done cause of the kit, so it wont be too bad.

If your in the area, your more than welcome to come and take measurement....and if your real nice, It would be easy to make the jigs to hold up the front end off of mine, but I think the BeeR kit's front end is shaped differntly so it might not help. Mabey next week before I leave for vacation, I could throw up some pics if anyone wants.

For the tailights, Im going to cut off the top stock bracket from the R32 lights, cut into a bit of the body, mount the lights, cut the trunk and rear fiberglass panels to fit, then vola!!

For the fuel door, BeeR's kit leaves the stock one, and the panels are about an inch bigger. I've also dropped the stock fuel tank, and am going to cut the trunk out and make a fuel cell with built in diffusers. At the same time I'm going to cut in new rear brake ducks and vent them through the rear bumper.

I am giong to post everything when I'm done, I've been video tapeing the whole thing.

If you have any questions, I'll do my best to help

[Fr0sty]

any pics of the rear end soon?

[mwracing]

i hate you. your such a **** tease. now the question is, what is the girl wearing underneath the skirt? lol. car is looking nice.

PowerFC
700cc SARD's
R32 N1 turbos
Nismo FPR
Walbro 255lph
Nismo Downpipe
Catless
HKS Catback
drinking toluene @ 100 octane

[assass1n]

i hate you. your such a **** tease. now the question is, what is the girl wearing underneath the skirt? lol. car is looking nice.

[mwracing]

Teaser

you know how a girl lifts up here skirt when she is trying to hitch hike?


Well all you get is a fender today.

[mwracing]

im going there today or tomorrow to swap seats from the car. since i sold the drivers seat. so i can talk some update photos

[TW]

we need pron err i meant pictures... pls pls pls pls

word. at least let us know whats going on?

[Fr0sty]

we need pron err i meant pictures... pls pls pls pls

[mwracing]

Hmm.. I see. Mine was only 3 inches away. So, with the extended body and the original gas intake placement... I can still put in the gas filler without any problems.

But, with 4-6in. .. uh.. yea.. I can see why you would need to modify that too.

i didnt mean 4-6 in wider.. i ment sideways. it has to be moved closer to the taillights or door jam.

[604R32]

the gas door is about 4-6 inches away from the Quarter panel of the r34.

so they have to modify the gas door area inners to move over 4-6 inches.

Hmm.. I see. Mine was only 3 inches away. So, with the extended body and the original gas intake placement... I can still put in the gas filler without any problems.

But, with 4-6in. .. uh.. yea.. I can see why you would need to modify that too.

[mwracing]

tube relocation? Sounds excessive. Did you see my door setup that last time?

My fabricator simply extended the walls out to match the new body. Door hinge included with the extension. I can show you pics if you want. Might save you some trouble and lots of money!

the gas door is about 4-6 inches away from the Quarter panel of the r34.

so they have to modify the gas door area inners to move over 4-6 inches.