1992 Skyline GT-R Rb26Det

[Rapier46]

I'd like to see pics compared to stock turbos

[Vojislav]

no kidding! you're redline before spool!!

I will start spooling at 3.5K rpm i will be runinng 30psi of boost on the car.
With a good port/Polish the car will run perfectly.

All i can say is math man it adds up well for what i plan to do.

Thanks For your thoughts

[Vojislav]

Got dammit that's big. What is it?

Turbo
Comp gt4202r-76
76mm ind 102 mm exd
Tripple Ball Bearing
Single scroll t4.96a/r
Sx trim Exhaust Wheel

"READ"

Thanks Vic

[rb26powered74zcar]

That's wicked man! Please explain Tripple Ball Bearing. I did not know they exist. Thanks - j.

[Vojislav]

That's wicked man! Please explain Tripple Ball Bearing. I did not know they exist. Thanks - j.

This should help Just 3 of them.

[NismoS-tune]

I will start spooling at 3.5K rpm i will be runinng 30psi of boost on the car.
With a good port/Polish the car will run perfectly.

All i can say is math man it adds up well for what i plan to do.

Thanks For your thoughts

Wow, even tiny twin R34 N1 turbos don't make much useable power at 3500 rpm. I'm dumb for going twins thinking I'd spool faster than a tractor turbo

Unless you mean the turbo will begin to spin at that rpm.

I thought Supras were really laggy with this size of turbo and a more displacement.

[frankiman]

This should help Just 3 of them.

i only see 2 ball bearings, like most turbos

[RHDskyline]

he said its just like that. Only 3 bearings. Thats what i think he meant anyways

[NismoS-tune]

he said its just like that. Only 3 bearings. Thats what i think he meant anyways

and it spools faster than twin N1.

[FOOT]

there are two bearings on the comp side and just one on the exhaust side. Single turbos aren't so laggy like everyone thinks. With a built motor he won't worry much.

[Vojislav]

Update

We got a little drunk did some mock up haha

Enjoy

[Rapier46]

god damn the outlet of the intake side is ******* huge

[MikeM@Ztune]

Update

We got a little drunk did some mock up haha

Enjoy

Haha, looks good, just don't do that during final assembly!

[curtisgoodman]

ooOOoo... shiney... me like!

[Vojislav]

Update Dec 16 09

Well its been cold as ****. So i spend the last weekend insulating and covering my garage with plywood. Heat

Here are some pics of the tear down and clean up Prep-work is killing me but enjoy.

Parts for sale
265, 9.6 cams
Polished factory intake
Gtr Seats 2fronts and back
750cc denso injectors
Old Turbo/Manifold
Factory Rad
Rb26 Transmition
Flashed Pc with 2 Hks Idle Stabilizers

Email Me at Tomanovicvojislav@gmail.com If yah are intrested

There will be more parts

+ a complete 240sx se zenki Every Thing but the shell. When i mean everything its everything