Is this the spongebob car at Driven 2012?!?!?!?!
Announcement
Collapse
No announcement yet.
GTRawrr 32 Build Log
Collapse
X
-
Sorry I haven't been able to reply to this thread in a while but I'm back (:
I have been looking at turbos and manifold as well as cams and such.
What I want to put on is:
- HKS T51R Turbo
- Full race RB26 Twin Scroll manifold
- HKS 272* 10.25mm cams
- RB28 Single turbo setup
- PnP build head
Those are the big components I am looking to go for and building this car by hand.
The ABS and master cylinder had been leaking on this car for a long time and has eaten all the paint from the underbody and engine bay. I think I am going to sand the whole underbody and engine bay to restore it. Going to strip the interior and use dry ice to knock out all the old paint and sound deadener. Here are some pictures of what I have been up to lately!
As for the white car, I am on BC sport coils with both collars removed and maxed out. Car has no spring tension hahaha. And yes it is the one from DRIVEN 2012.
Yes... I bought a third GTR haha
Will post pictures of the engine bay sometime soon, I had to paint it to stop it from rusting more over the winter as it is too cold to paint it throughout the winter ):
Enjoy!
Comment
-
UPDATE
So I got around to cleaning up the engine bay to prep it for some spot welds so I can start doing a wire tuck on my harness and such. Relocating the battery/ coolant res/ washer res/ fuse box. But winter came pretty damn fast so I had to spray over the uncovered metal just for now to prevent any further rusting as we park a JEEP in the garage beside her and it gets pretty humid in there some days. Won't be able to do too too much when the weather is cold but I think next ill drop the subframe and clean up all the parts for powdercoating.
I forgot to mention that Dannie Riel signed my car back at Driven 2012 if you guys haven't seen it haha. Screw the posters!
This is Dannie btw
Daily driven in the snow haha
Comment
Comment