Samwest - R32GTR Street and track toy.

[Supraclean]

Yea you could replace the hardware, might were tight when I removed them so I cant see how it could have slipped unless the clearances were out. Either way all the best to ya man.

[xcye]

There is another problem with poor quality pulleys. They may wear out the belt faster. You may want to watch out for that if you decide to use them.

Yeh ill be upgrading turbos cams etc one of these days for around 450awhp and i will still use these pullys if one slipped someone didnt check the bolts even the good ones would slip if the bolts arnt tight

[RCKSTR]

Great looking build so far, looks like fun and is really clean

[Samwest]

Great looking build so far, looks like fun and is really clean

Thank you =)

[Dragon Humper]

the thing is, ive heard these are good. But only if you change the bolts to better and maybe use some locktite. But i will definately consider it now....i mean its not worth to risk it it.

They are good, the hardwear is chinzy but that is easily fixed. 90% of Chinese part failure is human error in install and/or fastener insufficiency. The button head bolts look nice but the thread size is small, switch to a standard Allen head bolt and upsize the threads at the same time and you will be fine. 242 Loctite is a very good idea too.



Jon.

[Samwest]

They are good, the hardwear is chinzy but that is easily fixed. 90% of Chinese part failure is human error in install and/or fastener insufficiency. The button head bolts look nice but the thread size is small, switch to a standard Allen head bolt and upsize the threads at the same time and you will be fine. 242 Loctite is a very good idea too.



Jon.

thanks for the tip Jon

[Samwest]

Massive update.

So the car is ready to be transported to the mapper. The new changes to the car are:

*Poncams Type B
*Tomei gears
*HKS hardpipe kit installed.
*Nismo AFMS


Oh and i have a problem, the car wont start, starts for about 1-3 seconds and then dies. anyone know this problem?

Pictures will come asap!

[Redone]

What are your cams set to. I am running stock steel,wheel turbos and cams are set at 0 0.

im using ebay pullys had no issues at all but im only running on stock motor/turbos

[GTR203]

I need to set mine as well mine are 0-0 I got my old school tomei can gears on eBay you can tell they are at least 10-15 years old and had no markings on them got them for 22 bucks shipped! Turns out they are tomei! That may be the best deal I have gotten for this car