The GTR beast is awake after almost 1 year....updated Feb. 1

[GTR--J]

What is your hp and torque goals when all said and done?

Car looks fabulous.

Thanks!

With the head work done I'm hoping for 525hp - 550hp at 23psi on pump. Apexi pump and stock bottom end will be limiting factors at that point.

[GTR--J]

Bought a Garage Saurus drag wing but never added it yet. It needs "work" to fit.

[GTR--J]

Full-Race set up will be in the mail this week!

[GTR--J]

Part of my Full-Race order has arrived....gigadee gigadee!
The welds and quality is truly amazing! As a level A welder and inspector I am truly impressed!

I would recommend Full-Race with out a doubt to anyone!

[frankiman]

that manifold is an absolute work of art!
and does that turbo has variable pitch like on the 911turbo? im guessing not since it would be $$$ and you would need an ecu just for it

[GTR--J]

that manifold is an absolute work of art!
and does that turbo has variable pitch like on the 911turbo? im guessing not since it would be $$$ and you would need an ecu just for it

Here is an example of what the Full-Race set up and the BW s300sx 83/75 60mm inducer can do.

http://forums.nicoclub.com/zerothread/369889-e85-borg-warner-s360-results

[nelsonmxmarc]

Jizzzzed.
What an epic manifold. That is a serious piece of work.
Nice build!

PS; i now need glasses from being on here for the last hour reading, but fun none the less. lol.

[Daryl @ RightDrive]

good lord that is a piece of work, congrats on having the nicest manifold I've ever seen!

[GTR--J]

good lord that is a piece of work, congrats on having the nicest manifold I've ever seen!

Thanks Daryl! Wait till you see my new exhaust, intake pipe and charge pipes that I'm making......and the Arc ti cat back will be up for grabs if anyone is interested.

-4" .040 ti grade 3 for the intake
-4" .040 ti grade 3 from the down pipe back into a 4" burns stainless muffler
-3/8" grade 2 flanges
-3" .030 ti grade 2 for the two charge pipes in the engine bay
-4" .035 321 stainless for the down pipe

The ti and stainless tube is ordered and should be here in a week. If anyone is interested I might be doing ti exhausts in the near future.

[Daryl @ RightDrive]

wow, i might be interested in your ARC exhaust if the price is right
I drooled over it the first time it came through here, and would be interested in seeing it again.

[GTR--J]

wow, i might be interested in your ARC exhaust if the price is right
I drooled over it the first time it came through here, and would be interested in seeing it again.

Shoot me a pm if your interested

[GTR--J]

Ding dong........



12'3" - 4" .040 grade 3 ti
5' - 3" .030 grade 2 ti
grade 2 ti tig rods

4'8" - 4" 321 stainless

I'm still waiting for my Grade 2 ti plate for my flanges and I need to buy two 321 elbows for the down pipe and make a ti hanger.

[GTR--J]

7 1/4" x 7/16" CP2 Ti for flanges. I'm going to have these water jet cut for 4" ID 3 bolt flanges. I have a lead on one 80 deg. 321 stainless elbow but I might have to suck it up and buy a 304 elbow which will weigh 2 lbs. more because I can't find another 321 elbow.

[fredgtrDD]

I'm wonduring where do you get the titanium tubing and plate?

fred

[JD74]

Holly-Get-What-You-Pay-For BATMAN !



I think I just got a chubby.....

Some things are obviously worth the money.