Announcement

Collapse
No announcement yet.

r32 gtr rad

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • r32 gtr rad

    im looking to replace my rad soon. any recommendations? koyo? mishimoto? i want to be able to fit the oem fan shroud and retain the engine driven clutch fan. i see koyo has 2 sizes 48mm and 50 something mm. which ones did you guys use?

  • #2
    I recently with the KOYO, P#: HH020214, which I think is the 48mm one, haven't measured it but from what I know, it retains the stock shroud/fan setup.
    (ノಠ益ಠ)ノ 1990 BNR32

    Comment


    • #3
      I went with Mishi just due to availability and cost. Well built with lifetime warranty. The rad cap sucks, but I had a Nismo anyway. Would recommend.

      Comment


      • #4
        louis110 were you able to fit this mishimoto unit with the oem rad fan shroud?

        Comment


        • #5
          ck_chino Yes, still using the oem shroud with no modification needed. Screws up at the top only though, but no effect on the way it's mounted.

          Comment

          Working...
          X