Announcement

Collapse
No announcement yet.

GTR died on me, any ideas?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    what about dirty injectors

    Comment


    • #32
      i wouldnt' think dirty injectors would just make the car stop running at once, i'm definitly thinking some kind of sensor quit. like i mentioned it was running fine and then bam, died.

      Comment


      • #33
        checked for ECU codes, all i got was a 55 (no errors). perhaps that might help ideas. i'm going to try a vacuum leak test tomorrow.

        Comment


        • #34
          did you do anything witht the TPS ?

          Comment


          • #35
            Originally posted by PH_Motorsports View Post
            did you do anything witht the TPS ?
            wich wires would i test, i couln't find anything in the FSM. also i'm not sure that would be the problem. even when i keep the car running at higher RPM it is rough.

            Comment


            • #36
              check all your turbo piping...

              i know it sounds stupid but when i had my skyline...it would run ok and then randomly die because the turbo piping would blow off...

              weird i know but what the hell...might aswell give er a shot
              Fraser Valley Imports.ca
              (The Detailer)
              We aren't just Importers, we are Owners

              Bike Project: Susie - 05 Suzuki GSXR 600
              Car Project: In The Making

              Comment


              • #37
                Originally posted by DeviantRebel442 View Post
                check all your turbo piping...

                i know it sounds stupid but when i had my skyline...it would run ok and then randomly die because the turbo piping would blow off...

                weird i know but what the hell...might aswell give er a shot
                i've blown piping off before, different problem, but i checked it out anyways. it was and is still good

                thanks though

                Comment


                • #38
                  So did you try the procedure in the manual ?
                  1990 Nismo GtR #283
                  354hp - 292 ft-lbs
                  -"And I thought my girlfriend was high maintenance..." -Etienne

                  Comment


                  • #39
                    Originally posted by EtienneGignac View Post
                    So did you try the procedure in the manual ?
                    more specifically.... there are lots of different procedures

                    i tried a different coolant sensor and intake air sensor tonight with no luck.
                    if anyone in the edmonton area has consult or a PFC that i could borrow/rent for a day i would be extremely grateful. i want to be able to get some readings off of my sensors so i have a better idea of what is wrong. this is driving me insane, i just want to drive my baby again.

                    Comment


                    • #40
                      Originally posted by Gregzilla View Post
                      more specifically.... there are lots of different procedures

                      i tried a different coolant sensor and intake air sensor tonight with no luck.
                      if anyone in the edmonton area has consult or a PFC that i could borrow/rent for a day i would be extremely grateful. i want to be able to get some readings off of my sensors so i have a better idea of what is wrong. this is driving me insane, i just want to drive my baby again.
                      The one I told you about in post #18 of this thread...
                      1990 Nismo GtR #283
                      354hp - 292 ft-lbs
                      -"And I thought my girlfriend was high maintenance..." -Etienne

                      Comment


                      • #41
                        Have you checked for intake gasket/Throttle seal leaks?
                        1998 Stagea AutechVersion 260RS
                        1991 GTi-R "Angry White Ghost" - FOR SALE

                        Comment


                        • #42
                          Originally posted by EtienneGignac View Post
                          The one I told you about in post #18 of this thread...
                          gotcha, sorry my frustration with the car made me skip a few posts out of ignorance. does anyone have a link for the engine manuel, i only have the FSM and i didn't even know there was more.


                          and anthony i havn't checked but i will today.

                          Comment


                          • #43
                            Go on Klys file server at

                            http://klys.kicks-ass.org/skylines/

                            Then go extras & guides and it's called R32.Engine.Manual-580pages.pdf

                            Hope that helps.
                            1990 Nismo GtR #283
                            354hp - 292 ft-lbs
                            -"And I thought my girlfriend was high maintenance..." -Etienne

                            Comment


                            • #44
                              ^ thanks, i will download that for future reference.

                              I drove the car tonight!!!!!! it was the cam angle sensor, thanks for all the help guys.

                              Comment


                              • #45
                                Glad you got it fixed up...

                                Problem in my gtr is it has no engine :P

                                Comment

                                Working...
                                X