Announcement

Collapse
No announcement yet.

max boost on 444cc injectors

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • max boost on 444cc injectors

    what is the max boost on stock injectors....18-19 psi...just to know ,because it will take a bite of timel before i have my 750cc
    Last edited by typerrr; 09-02-2010, 07:04 PM.
    1989 SKYLINE GTR
    KAD paint
    FMIC
    HKS bov & piping
    TWIN 3in DOWN PIPE
    FREE CAT
    4in CATBACK
    STAGE 4 CLUTCH ( 6 puck )
    N1 OIL PUMP
    STEEL WHEEL TURBOS
    N1 RODS
    WISECO 87 MM FORGED PISTONS
    ACL MAIN & ROD BEARINGS ( std )
    COMETIC HEAD & BUTTOM END
    SIEMENS 750CC INJECTORS
    WALBRO 255
    12.3 @ 112MPH

  • #2
    Boost depends on your turbos.

    Just play it safe. I wouldnt go more than 400hp.

    Comment


    • #3
      rough rule of thumb is 1hp for every single cc so stockies are good for 444 haha but 400 is better to be safe

      Comment


      • #4
        You have N1 turbos, but your limitations are your stock injectors. 444cc=444hp. But a general rule of thumb, you don't want to go at 100% duty cycle on your stock injectors, so 85-90% is what is consider a safe good level which in turns get you about 400ish hp. Unless you have adjustable fpr,you can increase the fuel pressure to get more hp to the stock injectors. But, that's a whole other story.

        Comment


        • #5
          You should take into account they were 444cc new and likely don't flow as much now. Same with the oem fuel pump

          Comment


          • #6
            Changing the filters in the injector helps let a lot more gas flow through.
            Dang! You got shocks, pegs... Lucky! You ever take it off any sweet jumps?

            Comment


            • #7
              set at 16psi for now....pulling good
              1989 SKYLINE GTR
              KAD paint
              FMIC
              HKS bov & piping
              TWIN 3in DOWN PIPE
              FREE CAT
              4in CATBACK
              STAGE 4 CLUTCH ( 6 puck )
              N1 OIL PUMP
              STEEL WHEEL TURBOS
              N1 RODS
              WISECO 87 MM FORGED PISTONS
              ACL MAIN & ROD BEARINGS ( std )
              COMETIC HEAD & BUTTOM END
              SIEMENS 750CC INJECTORS
              WALBRO 255
              12.3 @ 112MPH

              Comment


              • #8
                Prbly close to the limit.
                Don't get greedy.
                Better yet, get a wideband and egt gauge so you can tell what's going on.
                Dan
                sigpic
                The Beaumont Connection

                Comment

                Working...
                X