Announcement

Collapse
No announcement yet.

testing oem knock sensors?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    testing oem knock sensors?

    hey gtrc,

    wondering if anyone knows the right was of testing knock senors to see if they are good? i ahve four and i know at least one is bad.... the question si which one haha, accidentally got em mixed up

    tried google, but no luck
    1992 BNR32 Skyline
    285hp / 220tq @ 15.5PSI On Mustang Dyno 2014-09-22

    Current Build:
    Precision 6264 Turbo 1.00A/R
    Tomei PonCam Type B
    Manley Titanium Valvetrain
    CP Pistons / Manley Rods
    Supertec Spline Drive Oil Gears/Drive
    N1 water pump / N1 Oil Pump
    Haltech Platnium Pro
    AEM Water/Menthanol
    Tomei FPR
    Exedy Hyper Twin Clutch

    May 9th, 2015 made 408whp @ 9PSI


    Build Thread
    http://forums.gtrcanada.com/gt-r-project-cars/62483-project-modworks-monster-r32-gtr-16.html
    Tags: None
  • #2
    I'm sure the Nissan manual has a resistance spec, they do for everything else. But normally speaking you use an oscilloscope and hit around the area of the sensor and see what sort of pattern you got.
    “Hey, come on, its a car right? No. It’s a symbol of your history, its a thread of continuity from which you came to where you are. It’s important that you don’t want to forget who you are.” -Dr.Phil in "Love the Beast"

    Comment

    • #3
      Hmmm I'll try to find the resistance soec for them, I couldn't seem
      To find anything on them but I'll take more time tonight and see if I can't find them.
      1992 BNR32 Skyline
      285hp / 220tq @ 15.5PSI On Mustang Dyno 2014-09-22

      Current Build:
      Precision 6264 Turbo 1.00A/R
      Tomei PonCam Type B
      Manley Titanium Valvetrain
      CP Pistons / Manley Rods
      Supertec Spline Drive Oil Gears/Drive
      N1 water pump / N1 Oil Pump
      Haltech Platnium Pro
      AEM Water/Menthanol
      Tomei FPR
      Exedy Hyper Twin Clutch

      May 9th, 2015 made 408whp @ 9PSI


      Build Thread
      http://forums.gtrcanada.com/gt-r-project-cars/62483-project-modworks-monster-r32-gtr-16.html

      Comment

      • #4
        Good question, please share your findings!
        TTBB is a true ACN member

        Comment

        Previous template Next
        Working...
        X