Starting the rb25 build on my r32/4

[cschepp]

Ok great I'm going to the shop tomorrow so I can take some pics and explain my problems.thanks man

[cschepp]

wont have time to upload pics tonight but i will tomorrow

[cschepp]

pics of sensor......

Motor is a rb25 s2 motor with a rb25 engine wiring harness(should be complete) Will also love to see a pic of the side of a rb25 with just the intake manifold off, need to do some plumbing that didnt come with the motor.

here is the sensor i do not have a plug for and need to figure out which sensor it is and why i dont have a plug:

[RWD_GTR]

Ooo that guy.. Ima take pics of my build tomorrow and I'll get pics of that and colors of wires etc

[cschepp]

Hey is your intake manifold off? If so can you take some pics of the engine, side of the motor I wanna see some pics of the intake side plumbing.

[RWD_GTR]

if u need any help with doing the side mount manifold i did mine myself and could walk u through it all but sorry i didnt have time for pics tonite i will tomorrow tho for the idle sensor

[cschepp]

Ok thanks man. I'm looking forward to it.

[RWD_GTR]

well i def have my plug and i dont have pics but u dont have any loose wires on ur harness at all in that area?

[RWD_GTR]

http://forums.gtrcanada.com/gt-r-project-cars/t-project-mexi-skyrine-ver2-page3-53139.html#post503691

here i have a bunch of stuff that may help u and i put it on my build so it doesnt confuse ppl on yours

[Zacho]

That needs a blue clip. It is the cold start coolant solenoid if I'm not mistaken

as seen:



Some pics of rb25 ff plenum plumbing:

[RSi]

There is an AWESOME writeup on skylinesaustralia.

Its pretty basic to do.

[cschepp]

Do you happen to have the link? I went on there and posted my problem as well.

Zacho are you saying I need a different plug altogether?

[RSi]

google found it in about 4 seconds:

http://www.skylinesaustralia.com/forums/to-Greddy-style-Plenum-t181826.html

[RWD_GTR]

that is the write up i used and aparently that peice u had was the coolant solenoid

[cschepp]

Oh ok. I have a local. Gtrc member coming to lend a hand with it this weekend hopefully. He did this swap into a s13 so I have confidence he will do a good job!