HIGHFIV5's RB20--->S13 Project (LOTS OF PICS!)

[eklips3]

very nice !
im in the process of the same project. keep it up man!

[falcon]

why wouldn't you just take your compressor and turbine housings off? it's easy.

[HIGHFIV5]

very nice !
im in the process of the same project. keep it up man!

Thanks man! Good luck with your project!

Falcon: Id rather not take my turbo apart and
make an even larger risk of getting paint inside it...
It took me probly less than five minutes to put a paper
bag around the other end and tape it around the middle.
It worked out fine...

[HIGHFIV5]

Just finished painting!
Will take more pics tomorrow without the
paper on the car! Gonna look hawt!

Here she is all scuffed and papered and waiting fer some
primer!




Gross master cylinder leaked when i first bought the car.
Since has been replaced from my parts car i used to have.
Grinded it all up to bare metal the best i could.



Taped up the electrical, this spots fackin' tricky to get into!


Woot fer paint fumes!
Haha decided i should crack a door then try to take pics...


Primed!




And here she is all painted and lookin freeeesh!





As mentioned...will take pics without paper tomorrow.
Lotsa updates in the coming weeks!
Am currently waiting on the last of my parts to arrive.
Currently en-route...
Innovate LC-1 Wideband kit w/ XD-16, ISIS 3" Downpipe, Godspeed Skyline intercooler kit, OEM Slave Cylinder, Exhaust Studs and Collector gasket (cant wait to put my damn engine together and throw up some pics in all its sexxy glory!), and tomorrow imma order my AEM tru boost gauge/controller, valve cover grommets, Isis stainless clutch line, and hopefully i can find a turbo nut lock as one of mine was broken.
Stay tuned!

[HIGHFIV5]

So whats with this no love for mah build GTRC!
Huh huh! Hardly got any comments on mah build,
whats with that! Takin all this time to make **** look sexxy and
i get very little feedback. Quite disapointing!


Anyways....
Okay here she is all untaped!
Lovin the red and black!
Gonna contrast my engine quite lovely!

Will be puttin in the walbro this week and tackling the wiring,
as i dont got much to do now besides wait for parts!
WOOT!



Dont mind the odd small red spot....these spots are covered by the wiper motor and the brake booster so no biggy.




Decided to use flash for this pic. :P
Camera a bit of a hoe sometimes...

[strong]

Well Nice job man. Looks like a decent build and should be a fun car for the summa!!

[PL_GTR]

it is pretty sweet, sorry i wanted to comment before!

[Skym]

I like. Nice job.

[HIGHFIV5]

Thanks man.

UPDATES: Upper harness is complete with the exception of extending the MAF plug and re-looming it.

Got some stuff today.
I love getting parts, feels like Christmas.
I Always tear **** open and then admire it then leave the pile of boxxes and various packing wrap scattered about :P


Isis Downpipe and Godspeed Skyline Intercooler Kit





The welds on the Isis Downpipe are very nice!
Looks like a real quality piece!


Godspeed Intercooler welds arent the greatest but definitely a solid piece.
Im more concerned with the fitment and flow which is both sposed to be real good so gess we'll see.

[RABBIT]

looking good

[GavinJohnson]

looking good man, im assuming you got all the wiring worked out in the end?

[HIGHFIV5]

Thanks man! Yeh i think sooo...
gess well find out if it starts or not :P haha
I made a wiring guide for dumbies along my way!
To straighten out any confusion brough by the other
shitty guides.
Ill test it first though of course tho.

[GavinJohnson]

haha ive been meaning to do that, but been to busy getting payed to do them for people so ill hold off for now

[BigBadGT-R]

Spray nine eh. what rig are you from! lol

Nice build thread too

[HIGHFIV5]

haha ive been meaning to do that, but been to busy getting payed to do them for people so ill hold off for now

I could send yeh my rough copy maybe you could look it over and
lemme know if yeh got any comments or anything?

Spray nine eh. what rig are you from! lol

Nice build thread too

LMFAO. Im actually a first year automotive service tech.
What can i say the **** works wonders!
Thanks man!