My new project.. R32

[MaxGTST]

I would love to show you pics with my new wheels on .. but I still didn't receive them !

[Oakville]

thanks max, what are the wheels gonna be?

[MaxGTST]

Stingers
18x9 +23 ( I'll probably use a 25mm spacer on these making them a 18x9 -2 ) with 215/40
18x10 -1 with 225/40

I posted some pics when I bought them on Yahoo auctions

[jessem]

Is that going on stock body?

[MaxGTST]

yes ! Major pull, major stretch and major camber will make them fit ! If not, I'm selling everything and going widebody with at least 11inch rims.

[C-unit]

18x10 -1 should fit on stock body no problem. 225/40R18 tires and just a roll with small pull should do it.

[MaxGTST]

yeah, my friend is running 17x10 +11 with 225/45 with a small pull but he has alot of camber, will see once I get the rims ! Skyline quarter panels look hard to pull tho'

[MaxGTST]

Receive those 2 big brown box this morning


Yay finally after 1 month !




Test fitted the rear, front will need a spacer to clear caliper





Lot a camber + stretch + pull and I'll be alright

[Nissan_Sean]

[mightyrocker]

Those wheels are going to look great.

not usually a fan of vip wheels but. yumm!

[GTS4-R]

yes.... the fenders are hard as hell to pull.... have fun!

gonna look sick when done

[MaxGTST]

yes.... the fenders are hard as hell to pull.... have fun!

gonna look sick when done

Yeah, I know... that's the sad part, I wasn't looking to run negative offset, but I couldn't pass that deal. I wanted to run around -1.5° camber, but now I can forget that idea, I'll never be able to pull the fender enough

[sabotage]

cut the inner wheel well off the out skin and then roll and pull there will be body work needed but very possible to fit this rim.the only place i see it giving you a hard time is the gas filler it will want to kink alittle.im running a 19x10.5 offset is? but it sat close to what you have pull and roll it will work and look so sick.

[MaxGTST]

that's what I thought of doing, what makes the quarter so hard to pull is the fact that there's actually 2 big metal sheet.. but separating the inner wouldn't make the outside one too easy to bend ? Or welding it back will make everything as strong, but pulled ? Might do this if I really can't pull those enough even with major camber.

[sabotage]

i would do it so you dont have to run so much camber ,its hard on tires and parts.plus you will have a better foot print and hook it up better.if you run that much camber you will have only three inchs of tire contacting on straights. anyways nice ride.