feyd182's GTS 4 Daily Babyzilla

[ColinR33]

Hallman makes a good MBC, that's what I'm using on mine, about $90.

[Voodoo_ChildR32]

So the RB25 turbo works well. Spools around 2800rpm, and seems to be giving me about 7psi of boost. I also added a front mount intercooler 24"w 12"h 3"d. Next step is to add a boost controller and turn up the win. I'm going to try it at 10psi and see how it goes. Just gotta find a cheap manual boost controller now.


Sent from my iPhone using Tapatalk

[TheyKilledKenny]

Lots of win

[Voodoo_ChildR32]

Engine bay with RB20 turbo removed. (Leaking oil seals)

RB20 turbo with leaking seals. (to the right is the RB25, double bladed compressor)

RB25 turbo. (single bladed compressor)

RB25 turbo put together and ready to drop in.

Engine bay with RB25 turbo installed. (ceramic coated manifold)


Sent from my iPhone using Tapatalk

[Voodoo_ChildR32]

Thanks! Still needs a little tweaking, but overall I'm happy with it.


Sent from my iPhone using Tapatalk

[ColinR33]

Sure didn't waste any time slapping that sucker on there James! Looks good!

[Voodoo_ChildR32]

Sent from my iPhone using Tapatalk

[Voodoo_ChildR32]

Just got my new front mount.




Sent from my iPhone using Tapatalk

[BoostGetsYouLaid]

Got the 25 turbo sitting in my workbench, but the body parts fir sure!
Rb26, hmmmmm



Sent from my iPhone using Tapatalk

Just pm me sometime and Ill give my contact#

[Voodoo_ChildR32]

Got the 25 turbo sitting in my workbench, but the body parts fir sure!
Rb26, hmmmmm



Sent from my iPhone using Tapatalk

[cschepp]

I have a rb26 in mine. I don't think I will ever own a rb20 again.

[TheyKilledKenny]

Definitely nice. Throw a rb26 in there and be done with it. Very easy to do

Id keep the RB20 til she blows, then maybe consider swapping it. Your engine sounded solid so that should be awhile.

[cschepp]

Definitely nice. Throw a rb26 in there and be done with it. Very easy to do

[BoostGetsYouLaid]

Car looks very clean i have a friend with a Gts-t M looks just like it minus the rims.
I dont know if their is any skyline "junkyards" in edmonton but if your ever in calgary pm me and i could probably help you out with getting the GTR body parts and 25 turbo.
Good luck

[Voodoo_ChildR32]

Well bought the car approx 2 months ago and have been slowly bringing it back to life.


Plans are somewhat modest as I plan on driving it year round, YES I said year round, lol. My last Skyline was good in the snow, always started, even in minus 25 degree weather. I figure if I'm gonna get a car I've longed for I might as well enjoy it. I don't plan on ever selling it as I would loose all I have invested so she's mine forever.

Starting off will be a full fluid flush with all synthetic. New tires, Of course an RB25 turbo and front mount I.C., I have already replaced front tie rod ends so steering is as tight as a nun's u know what. In dash DVD. Full interior shampoo. Most importantly rust proofing! I don't care about the extra few pounds that may add. Next year will hopefully be paint and a GTR hood, and possibly a GTR spoiler.
I will continue to add pics as I progress, I already have tons just need to upload off my camera.

Updated:
Current list of mods:
GTR FMIC w/piping kit
R33 GTR Coils and Harness
R32 GTR Clutch Slave
R32 GTR Spoiler
R32 GTR Vented Hood w/Aerocatch Pins
91 Pathfinder Brake Master Cylinder
Dot 4 Synthetic Brake Fluid
Turbosmart MBC
RB25 Turbo
3" Turbo Back Exhaust
A/C Delete
Clutch fan Delete
Mishimoto Aluminum Rad
Apexi Intake
Taylor Battery Relocate Kit
Tomei Hicas Lock II
Tokico Potenza Street Dampers and Springs
Megan Adjustable Front Tension Rods
Driftworks Adjustable FUCA's and RUCA's
10MM Front and Rear Wheel Spacers
6000K HID's
Blitz Racing Boost Gauge
Oil Pres., Water Temp. Gauges
Apexi Turbo Timer
Momo Steering Wheel

Pioneer In Dash 7" DVD

Fresh pics:











Myself and the car are located in Edmonton, Alberta.