Hey all
Well, after being out of the car scene for a while, I decided I wanted to try something a little different.
I've always been a fan of Skylines, so I decided to get one for myself off a member on the boards!
The car came with a nice list of stuff:
- RB25 Turbo
- GTR Injectors
- GTR Resistor Pack
- 3.5" full exhaust
- HKS Intake
- AEM Fuel/Ignition Controller
- Turbosmart Megasonic BOV
- Megan Coilovers
- GReddy Boost Controller
- GReddy FMIC
- Nismo 1.5way LSD
- Ogura Clutch
The previous owner cut the GTS bumper to allow air flow to the FMIC. He did a pretty good job I think, but if the fitment can be done, I'd love a GTR bumper.
I know I'm forgetting some more but I'll update later.
Anyway, here's what I got for it so far:
- 17" Work Ewing (BBS replicas) (Front: 17x8.5 Rear: 17x9.5)
- Z32 MAF
- Z32 4-Piston Front Calipers (The car came with S13 single piston brakes )
- OEM R32 Steering Wheel
- GTR Front & Rear Seats
- Type-M Side Skirts (Not installed yet)
I want to buy:
- GTR Hood
- Potentially a GTR grill if it's compatible with the GTS headlights?
- Maybe a GTR bumper depending on how the fitment will be with GTS fenders
- GTS Amber corner lights
My plans for 2012 is the RB25 route, with a goal of 500rwhp
I'll be creeping other GTS RB25 builds to get some ideas
I'll cut it short for now and just get to the pictures!
Coming back from Cayuga!
My car being dyno tuned by Tony @ DMT!
As per my sig, she made 264whp and 227trq @ 1-bar
Thanks for reading, I'll update my car's progress as it goes on.
Well, after being out of the car scene for a while, I decided I wanted to try something a little different.
I've always been a fan of Skylines, so I decided to get one for myself off a member on the boards!
The car came with a nice list of stuff:
- RB25 Turbo
- GTR Injectors
- GTR Resistor Pack
- 3.5" full exhaust
- HKS Intake
- AEM Fuel/Ignition Controller
- Turbosmart Megasonic BOV
- Megan Coilovers
- GReddy Boost Controller
- GReddy FMIC
- Nismo 1.5way LSD
- Ogura Clutch
The previous owner cut the GTS bumper to allow air flow to the FMIC. He did a pretty good job I think, but if the fitment can be done, I'd love a GTR bumper.
I know I'm forgetting some more but I'll update later.
Anyway, here's what I got for it so far:
- 17" Work Ewing (BBS replicas) (Front: 17x8.5 Rear: 17x9.5)
- Z32 MAF
- Z32 4-Piston Front Calipers (The car came with S13 single piston brakes )
- OEM R32 Steering Wheel
- GTR Front & Rear Seats
- Type-M Side Skirts (Not installed yet)
I want to buy:
- GTR Hood
- Potentially a GTR grill if it's compatible with the GTS headlights?
- Maybe a GTR bumper depending on how the fitment will be with GTS fenders
- GTS Amber corner lights
My plans for 2012 is the RB25 route, with a goal of 500rwhp
I'll be creeping other GTS RB25 builds to get some ideas
I'll cut it short for now and just get to the pictures!
Coming back from Cayuga!
My car being dyno tuned by Tony @ DMT!
As per my sig, she made 264whp and 227trq @ 1-bar
Thanks for reading, I'll update my car's progress as it goes on.
Comment