Saved my car from the great scrap heap in the sky(redo of my first car thread)

[Modb]

seeing the state of that clutch and flywheel just pisses me off. is that bolt gone gone, or is it rattling around in the bell housing of the trans? some people just don't have the decency to do the job right.

Its gone gone lol, I'm gonna go to Nissan tomorrow and get one ordered hopefully.

[Modb]

Small update.
Got the engine all together on the stand, as well as sprayed the engine bay with a quick coat of paint.







Also found out that my flywheel was machined a little before i got it, so I'll have to keep my eyes peeled for one for when my RB20 transmission lets go lol (Note, I had the bolts slightly machined :P )

Ordered a few more odds and ends today as well, being a 2" to 3" 90 coupler for the turbo, and a 2.75" to 3" 90 for the throttle body, and the oil drain for the Brog Warner

Note April 15th
Ordered oil feed line an fittings, and all the an fittings needed for the fuel pressure regulator nothing like $100 in AN fittings.
Ordered 2 12" electric fans.
Ordered Apexi turbo timer.

[Modb]

It's been a little while since I last updated this so I'll just post a quick picture

[thumper]

is it running?

[Modb]

Little update:

Cars been running for the summer, just been trying to iron out some kinks.



got the car running just in time for a little fundraising car show

[bobbo]

Who did the pipe work?

[Modb]

All of the piping was done by a friend of mine, Ben Graham. I was stoked on how nice it looks haha

[Modb]

Small update:

Picked up some 18" Work VS XX's while in Toronto for Import Fest

[Modb]

[bobbo]

EFFF! Car looks awesome! Such a good story.

[Modb]

Thanks!! Aha it's been quite a wild run, and i plan on cleaning up a few things next year but i hope to have a year to enjoy the car now.

[Modb]

Guess I'll make a 2016 Update, the car for the most part isn't getting much done to it after the big over haul last winter. Main goal for this year is to fix a few issues, one being re-finishing the Work VSXX's I bought in September as the needed to be re-sealed. I'm also doing the LS coil conversion, soon to order Haltech, and fix an exhaust leak at the manifold.
I wanted to use gold plated hardware, and have the faces re-powder coated white and they tuned out really good.





LS Coil conversion harness from Wiring Specialtys


Also could resist and I bought a CF Fujimura Gurney Flap haha