rb20 falcon...

[merkmerc]

Something a little different Im currently 2 months into tossing together for a summer daily driver . So drug it out from next to a coulee in a farmers field and now this is where im at . Details are its a 1962 ford falcon 2dr the roller is all new suspension and brakes etc etc and drive train is a rb20det manual trans , HE351VE turbo with internal wastegate controling the vgt . Emanage ultimate and all the supporting goodies head studs etc enjoy ...

[h4X6]

Nice!!!

[MKIV]

Something you don't see every day... looking forward to more updates

[merkmerc]

SCAT 4340 h beam rod shifter with built in line lock switch

tunnel fab a month back

[dah_hunter]

This is awesome..

[Gibson]

That is the coolest RB valve cover I've ever seen.

[gtrjerry73]

This is a pretty cool project. Good for you.

[Modb]

Thats a bomb coil pack cover, just be warned that it may melt your coil pack harness, like mine.
you can kinda see it in the picture.

[merkmerc]

it should be fine everything is still in mock up and fab the harness iS currently all blown apart and being redone to make it as plug and play into the car as possible . The coil pack harness and a few other one are all in high temp foil harness sleeves to avoid this . I cant see it being any worse than the stock plastic cover seeing as the alum will disapate heat better . Only time will tell lol

[Modb]

Front of the engine at the top.

that's the back of the piece that was covering my coil packs and I'm not talking about the harness, I'm talking about the plastic connectors melting to the coil pack it traps heat if not vented.

[merkmerc]

That look more of an under hood heat problem than just your covers fault seeing as the stock on is a seal to cam covers via rubber seal . This one has i think it was about .100 thou shims underneath it to keep it up high enough for appearence but should help allow more air to vent than stock but thanks for the heads up

[Modb]

No problem man i look forward to see what you do with your build

[RCKSTR]

Very nice! I like seeing something different!!!

[merkmerc]

the trunk is wired and power wires etc minus the top of the battery box . most the other other wiring sorted out and my exhuast flanges all waterjetted out for the he351ve turbo . and all my injectors and interior is sitting at the border

[Supraclean]

Wow that look good man, also that pick really helps me wire up my battery shut off. So just to confirm wired like that will cut power to the rest of the car and fuel pump correct?