r33 GTR cluster into R33 GTS-T , tach is off

[bnsportsr33]

anyone know why this would be? my tach reads 1000 rpms higher than my gts did

so if i'm at idle, it's sitting at 2000 rpms, now it's not such a huge deal but I'm just wondering why this might be,, I know we used the servo out of the gts-t cluster cuz the one for the GT-R wasn't working so we just took the GTR face off and put it on the GTS one...

like i said not really a big deal just wondering if it's a quick fix if not i'll just leave it,, just more of an annoyance than anything'

thanks

[Skym]

Can happen if rpm needle is put back incorrectly (if replaced face). I would think adjusting rpm needle 1000rpm lower = problem solved.

[bnsportsr33]

doesn't it only go on 1 way? :/

[Skym]

It's something someone who had this problem in the past told me he did, but was on a R32 from memory. Or could get a rpm corrector kit from Jaycar or similar car electronic store (I know Jaycar sell a speedo corrector for when changing rims, diffhead ratio, etc, not sure about rpm).

For example of what they use to correct speedo -

http://www.jaycar.co.nz/productView.asp?ID=KC5435&keywords=Speedo+Corrector+MkII+Kit&form=KEYWORD

[bnsportsr33]

thanks for the reply, it's really not that big of an issue, I'm just 1000 rpm more than I should be, I just gotta adjust my brain

yea but when I put the needle on there was like a stop thing at the bottom a little line, so I think there is only one way to put it on, or I could be wrong wh