DEAL: Injector Dynamics & Powerhouse Racing Fuel Rail Combo!

[NismoS-tune]

Any 2000cc? I'm maxing out my current ones... I don't mind loud injectors since I have a loud exhaust anyways.

[gtrjon]

Any 2000cc? I'm maxing out my current ones... I don't mind loud injectors since I have a loud exhaust anyways.

2000cc holly **** man i thought you were only shooting for around 600hp lol?

[NismoS-tune]

2000cc holly **** man i thought you were only shooting for around 600hp lol?

I was hoping Braden would catch that first and laugh cause I was recently asking about 1000cc but I was told I'm fine with 800cc as even 750cc would do. I'm shooting for 500whp at 1.2-3 bar with -5s. Should be doable since there's a few guys with N1s getting 500whp with the same or less boost.

[Tony]

Prob a dumb question but being that the RB26 is low impedance stock, is there any provision or instructions on switching to a high impedance injector?

[Bruizer]

Prob a dumb question but being that the RB26 is low impedance stock, is there any provision or instructions on switching to a high impedance injector?

Delete the injector ballast (Aka resistor pack).

If you don't know what I mean, shops can do it easily

IMO, sard injectors are just as good and don't have the stupid sleeve that can become a leak source. The injectors all come with a flow test printout in the package but they are a photo copy of the picture they use on their site so who knows.

Someone told me they were rebranded oem ford injectors...

[FOOT]

Do they have a 1200cc or a 1400cc. 2000cc would be great if I wanted to go to Methanol but I don't want to go full on race car with it for a while. I like the street car vibe right now.



Jon.

Planning on making 1500+whp. Methanol for a street car isn`t a good idea. I would look into moran racing injectors. you can get 220lb billet injectors for a good price.

[Tony]

Delete the injector ballast (Aka resistor pack).

If you don't know what I mean, shops can do it easily

IMO, sard injectors are just as good and don't have the stupid sleeve that can become a leak source. The injectors all come with a flow test printout in the package but they are a photo copy of the picture they use on their site so who knows.

Someone told me they were rebranded oem ford injectors...

I understood that to be the general idea but i was wondering if there was any specific instruction for this included or even a PNP adapter like I've seen offered for DSMs.

[falcon]

Delete the injector ballast (Aka resistor pack).

If you don't know what I mean, shops can do it easily

IMO, sard injectors are just as good and don't have the stupid sleeve that can become a leak source. The injectors all come with a flow test printout in the package but they are a photo copy of the picture they use on their site so who knows.

Someone told me they were rebranded oem ford injectors...

SARD are NOT as good as ID. Lol....lolololol

[jdmchrist]

still doing a deal on that?? i need 6 ID 2000cc 11mm injector and 1 11mm black powerhouse racing fuel rail for rb26 ship near montreal . pm me the final price for that please thanks!