AMS Front upper control arms , r32 gtr. HELP.

[MarusGTR]

I've ran them with no problems either... Except surface rust. For some reason, the alan bolts in the FUCAS and the gap in between the welds on the RUCAS have rusted during storage, while everything else (including the brake rotors) were oxide free.

Anyway, nothing major and great bang for buck.

I picked up a set of the ams fuca's used and when i got em in the mail one was reversed. When i put them over top of the stock fuca one matched perfectly while the other was parallel just like they show them on AMS website. What would be correct way to install these? If they go in different from the stock **** it appears to me that the caster would change drastickly. Any suggestions would be good as i will compelete the install this weekend. At first look the ams fuca seem of good quality. Anyone know where the bad rap came from about AMS quality?

Thanks

Mitch g

Rotate one end until you get the same shape as the original FUCAS. Do yourself a favor and set them so that you have good access to the clamp bolts for alignment.

[caliber676]

So what torque is everyone using for these? Im assuming the lower end of the specifications ie 65ft lbs.

[gtrdriver]

Awesome. Thanks for the input Marus. Saved me some time to research other things like dissassembly of the head. Gotta do some reading in the first section of my bible.

Mitch G

[RANTARAVE]

I got a shop to install the AMS control arms on my BNR32 and im having no problems