Official Nistune Group Buy!

[MikeM@Ztune]

Hey guys, as you know, Nistune is a pretty killer priced tuning system! It isn't as full-featured as HalTech, but gives you full control over tuning the stock ECU (fuel maps, timing maps, knock maps, VTC for engines with VTC, injector size scaling, MAF scaling, load point & rpm scaling, etc). It's a very economical option for tuning, and unlike a piggy-back, it requires no modifications to your wiring harness! A Nistune daughter board is installed in your ECU, allowing you to use real-time tuning from your laptop via a USB to Consult cable!

Nistune also supports single and dual wideband integration!

Nistune uses the stock 16x16maps. PowerFC provides 20x20 maps, but doesn't have knock maps (the map used to reduce timing when knock is detected). Nistune allows you to use the knock maps! Nistune won't give you all the features of a Haltech, but it's a great system for most 1990's Nissans!

More Information on Nistune Models:
Go to http://www.ztune.ca and seach for Nistune.

Software Screenshots:

Screenshot 1
Screenshot 2
Screenshot 3
Screenshot 4
Screenshot 5

What Is Nistune?
NIStune is a combination of hardware and software that enables real-time tuning through consult designed especially for Nissans, and it provides the ability to:

- Retune factory Nissan Engine Control Units (ECU)
- Monitor gauges and map tracing on your ECU
- Data log from your ECU using consult, wideband and auxiliary inputs
- Perform playback using graphs, gauges and map tracing

It provides:

- Connectivity for up to two emulators simultaneously (Pocket Romulator and Moates Ostrich)
- Loads and Saves files in regular and odd/even formats for chip burning (EPROM/FLASH)
- Support for up to two simultaneous wideband units (various commercial units supported)
- Communication to our specially developed NIStune Real-time boards to perform real-time tuning

Features:

- Real time tuning, map tracing, logging and playback
- Consult display capabilities with real time diagnostic information in a separate window
- Full Log Recording and playback is available for all consult variants.
- Dual channel Wide Band support
- Wideband can also be recorded inline with consult data and played back.
- Edit five ROM images simulatenously, with comparison capabilities
- Map and table copy feature
- Intelligent display tables decoded for easy modification
- Completely editable multi window grid, map/table views
- Knock cells highlightable, pinpoint map trace configurable for follow and trail functionality, cell marking available
- Resize injectors and change AFM capabilities
- Real time RAM monitoring system
- AFR and auxillary input trace against RPM and load
- Hardware and software installation guides and manuals provided


If we have 6+ people, we can do an extra 5% off.

If we have 10+ people, we can do an extra 10% off.




Nistune Type-1 Board - VG30E / RB30DE(T) / CA18DE(T) / KA24E

Reg $420 CAD, 6+ $399 CAD, 10+ $378 CAD!


Nistune Type-2 Board - VG30DE(TT) / RB20DE(T) / RB26DETT

Reg $420 CAD, 6+ $399 CAD, 10+ $378 CAD!


Nistune Type-3 Board - SR20DE(T) / KA24DE / VR30DE / VG30DETT (except OBD-II)

Reg $466 CAD, 6+ $443 CAD, 10+ $419 CAD!


Nistune Type-4 Board - SR20DE(T) / GA16DE / KA24DE / RB25DET / VQ30DET

Reg $466 CAD, 6+ $443 CAD, 10+ $419 CAD!


What's Included:
- Nistune Board
- NIStune Software (Individual Users License)
- Documentation set
- Instructions

To have us install the board in your ECU is $25 (reg $40). If your ECU needs to be socketed, add $65 (reg $85).




PLMS Consult Cable
Used to connect your laptop's USB to the consult port for tuning.

Reg $115 CAD, 6+ $105 CAD, 10+ $95 CAD!



We can do any combination of boards, we just need 6+ or 10+ people.


For exact shipped price, PM me:
- Your Postal Code
- Your Engine Model (i.e. RB26DETT)
- Is your ECU already socketed?
- Do you want us to install the Nistune daughter board for you?
- Do you need the Consult cable, or do you already have on?


Sign Up: NAME/ENGINE
1. Kras / Type 2 Board RB26DETT
2. Snow / Type 2 board RB20DET (maybe)
3. Gdzilla / Type 2 board RB26DETT
4. Brody_Howell / Type 2 board RB20DET
5. beacher1B0 / Type 2 board RB20DET
6.
7.
8.
9.
10.
11.

[Kras]

I'm in but I'd like it if we could get 10 or more people first.

Also I don't know if I trust my soldering skills enough to solder the board myself... would I just mail it to you guys or what?

Anyone in Calgary feel condifdent in there soldering ability?



Sign Up: NAME/ENGINE
1. Kras / type 2 board rb26dett
2. Snow / ?
3.
4.
5.
6.
7.
8.
9.
10.
11.

[MikeM@Ztune]

I'm in but I'd like it if we could get 10 or more people first.

Also I don't know if I trust my soldering skills enough to solder the board myself... would I just mail it to you guys or what?

Yes, if you send your ECU to us, we can install it for you! I don't suggest trying to solder it yourself as the ECU is very sensitive to heat and static. We suggest having us install it, or getting it installed at a qualified tuner shop, or at an electronics repair shop.

Let's see how many people sign up, and then we can finalize the pricing and get everyone paid and ordered!

[GDZILLA]

Sign Up: NAME/ENGINE
1. Kras / type 2 board rb26dett
2. Snow / ?
3. Gdzilla Type 2 board for VG30DETT and RB26DETT
4.
5.
6.
7.
8.
9.
10.
11.

[LettoGTST]

Is it possiable to get Nistune for a Rb25 Neo ECU?

[Brody_Howell]

Sign Up: NAME/ENGINE
1. Kras / Type 2 Board RB26DETT
2. Snow / ?
3. Gdzilla / Type 2 board RB26DETT
4. Brody_Howell / Type 2 board RB20DET
5.
6.
7.
8.
9.
10.
11.

[MikeM@Ztune]

Is it possiable to get Nistune for a Rb25 Neo ECU?

Nistune has a prototype Type 6 board for these, but no ETA on if or when they will release it.

Currently, they suggest buying an HCR32 Skyline or Z32 300ZX ECU and using a Nistune Type 2 board. A few harness wires need to be swaped. We've done this before on Series 2 RB25's with 8-bit Z32 ECUs.

[beacher1B0]

Group buy or not Im in. Can we pay before or put a significant deposit down before the Group Buy is over?
Also is it possible to maybe get a break on USB Consult cables if we get say 10 or more orders for the cable? I need one of these too but not with this GB unless it gets cheaper.

Sign Up: NAME/ENGINE
1. Kras / Type 2 Board RB26DETT
2. Snow / ?
3. Gdzilla / Type 2 board RB26DETT
4. Brody_Howell / Type 2 board RB20DET
5. beacher1B0 / Type 2 board RB20DET
6.
7.
8.
9.
10.
11.

[Kras]

Group buy or not Im in. Can we pay before or put a significant deposit down before the Group Buy is over?
Also is it possible to maybe get a break on USB Consult cables if we get say 10 or more orders for the cable? I need one of these too but not with this GB unless it gets cheaper.

Sign Up: NAME/ENGINE
1. Kras / Type 2 Board RB26DETT
2. Snow / ?
3. Gdzilla / Type 2 board RB26DETT
4. Brody_Howell / Type 2 board RB20DET
5. beacher1B0 / Type 2 board RB20DET
6.
7.
8.
9.
10.
11.

Yea I'd need a consult cable as well.

[Brody_Howell]

Yea I'd need a consult cable as well.

Same Here.

[MikeM@Ztune]

Group buy or not Im in. Can we pay before or put a significant deposit down before the Group Buy is over?
Also is it possible to maybe get a break on USB Consult cables if we get say 10 or more orders for the cable? I need one of these too but not with this GB unless it gets cheaper.

Yes, we'll need to get everyone pre-paid.

Once we have enough people signed up, I'll work on getting everyone paid up. Once everyone is paid, it will take 7-10 business days to get everything in!

I'll work on GB pricing on the cables as well!

[Snow]

I will be in on this depending on timing of when it all goes down, so put me as potential (trying to decide if I'm going in for a tune and everything before I finish school, or if I'll be looking to do it in the summer).

I would need the Type 2 board for an RB20DET. I believe I'd need everything socketed and installed. Put me down as a maybe at this point...

[MikeM@Ztune]

Updated first post with a group buy price for the consult cables as well!

[MikeRWK]

im in depending on timing, hopefully i'll have a nice paying job in the next 2/3 weeks.

[NismoS-tune]

Hey, if it helps any, I have an OEM socketed ECU (ready for nistune) for sale in case someone wants to sell their OEM ECU or have a back up. I can't use it due to a vipec.