FS LS2 Truck / Yukon Coils, N62/Z32 Mafs

[DatsunZ31]

question for you, for us RB20 guys if you do this swap can you completely eliminate the ignitor since the coils HAVE built in ignitors anyway? there are a lot of write ups on RB25 S2 and rb26 but nothing concerning the RB20 and eliminating or re-using the ignitor?

[ToroGTS]

Ignitor is gone, see my sale thread for the plug-n-play harness for a detailed DIY

[tryingtobebest]

Yes, the ignitor is gone! Check out this guy above me ^, he has done it many times on RB20s!)

[tryingtobebest]

Middle of May bump!)

[tryingtobebest]

Updated first post with actual sets that currently are for sale!)

[tryingtobebest]

Canada Day bump!)))

[tryingtobebest]

Bump for a new school year!)

[RATM]

Hey, how much with a set of wires ? If you have some?

[tryingtobebest]

All pms replied, updated first post with current sets and date!

[tryingtobebest]

Updated first post with current sets pics!)

[topher589]

still have the ls coils ?

[steveo1502]

FS LS2 Truck / Yukon Coils, N62/Z32 Mafs

We'll figured I'd post a couple pics of my coil swap, picked up a set of these from tryingtobebest a few weeks ago, I followed nimblestix DIY and it was super easy, I was kinda worried about the wiring but once you start it's really not bad at all

First I layed the coils out on a piece of wood, just to see how I wanted them, and make the harness on the bench


Next I got a piece of aluminum, drilled some holes


mounted with some smAll screwes and nuts



I mounted it on top of the fuel rail, made some little brackets



Cut some little notches for the wires so I could still run the stock cover





I ran the +12 v power for the coils straight from the battery through a relay, I also didn't like the little bolts and nuts I had there so I cut some little pieces of pipe to cover each one and painted black, and took each coil out of its bracket and painted the brackets .I'll post a pic of it later

That's it

[steveo1502]

My bad, realized I posted this in the wrong section. GLWS

[tryingtobebest]

Good job Steve; Just got few more sets of coils yesterday, will update first post with current set pictures shortly!

[tryingtobebest]

Bump to the top!