Dyno Results with water meth

[evilgtr]

I cant post pics, I have a printed copy of my w/m dyno and a picture of my pump gas dyno so I can provide them to people via email or I can send a pic from my phone if anyone would like to see them. Iv only drove the car 3 or 4 times since I got it back home and sweet jesus its retarded it scares me now and I havnt even opened it up wde open yet.

red35 - thank you very much for help ( had we found the right parts haha ) Cam came through in the end and located spare parts.
I had bought a full 1000 plus HP capable fuel system when my intentions were to run race gas but then I decided to substitute C16 with alcohol injection which meant I wouldnt need the huge supply of fuel so I sold the after market set up.
Currently all I have is a Wahlbro 255lph pump,stock supply and return line,aeromotive FPR,HKS fuel rail, and 870cc injectors.

up to 550whp your stock lines,fuel rail and fuel pressure regulator will be suffecient dont let anyone tell you other wise. You need 1 or 2 big pumps to supply the fuel and large injectors to deliver it thats the key.

I made 520whp with stock rail ,stock fpr and 870's and it wasnt maxed out - it was just maxed out on timing,boost ect.

I only added the HKS rail, braided lines,and Aeromotive FPR just for looks more then anything

[red35]

Thats awesome. Sounds like our builds are very similar. I have the Tomei fuel pump and 550 injectors, but wanting to go for some big numbers i purchased the Powerhouse twin pump kit and some ID 1000cc injectors. Might be a little over kill but whatever at least fuel wont be ever be a issue plus it will look good in the engine bay.

U should drive over to Regina and we can go for a rip in your car.

[Redone]

what boost?

[evilgtr]

17psi on pump gas , 22psi with meth

[menace]

Where is the best place to pick up methyl hydrate? Also, when you guys mix it 50/50 with water, is that distilled water or just plain old tap water?

Thanks!

[gtrjon]

hey evilgtr i made 421awhp at rg on 11psi with the fuel system you sold me. I am also running a aem meth kit with 100% meth (yea i know its bad for the pump) but it was just starting to barley spray at the 11psi. ill be going back for 29psi with a better clutch sometime soon!

[collector240sx]

Where is the best place to pick up methyl hydrate? Also, when you guys mix it 50/50 with water, is that distilled water or just plain old tap water?

Thanks!

I just buy it by the box (4 jug of 3.78L I think) at Marshland, they seam to have the best price around here. Not sure about where you live tho.

PS. I noticed that no one talked about using windshield washer fluid, there's a few people around my place using it. (It's basically meth already diluted, not sure what the percentage of meth is in them tho) It's cheap and easily accessible. I prefer going with the real stuff and making my own mix, but for people simply using meth has a security measure (not tuned for the meth), it's a good cheap alternative.

[menace]

Thanks very much for the reply!

I live in Oakville, ON and I know you can get it from places like Home Depot even, but its something like $12 a gallon. I read that people are getting it from "speed shops" for as cheap as $2.50 per gallon.

I have Johnston Research & Performance pretty close to me but they are not known to be the cheapest shop. I'll check there since the hardware store jugs must be laced with gold flakes.

[Dragon Humper]

Crappy Tire, $7 a gallon in the fall when they are stocked up for winter, I by about 10 of them and am all set up for next summer. I don't inject it, I just burn it in my fuel.



Jon.

[menace]

Sweet thanks for the tip!

I assume that is the windshield washer fluid without detergents in it when you say "stocked up for winter"?

[newalliance123]

Hey hozer what intake manifold is that?

[hozer]

Hey hozer what intake manifold is that?

KU Engineering

[newalliance123]

Any trouble tuning with it? I'm tempted to go that route with a single TB just to clean up that half of the engine.

[hozer]

Any trouble tuning with it? I'm tempted to go that route with a single TB just to clean up that half of the engine.

Wouldn't say 'trouble' but the tune is a little more finesse. Takes a little more work to get right IMO

[NismoS-tune]

sadly, I only made 336whp , my tuner def. choked this one, I will need to talk to him tomorrow. its almost impossible to make that low of a number lol.

Nah,that's not bad. I made 300whp at 1 bar on -5s and I have, in my opinion, had pretty beefed up car.