C-unit's NuB GTR project o0o!!

[bellis_GTR]

It's really coming along dude! Lots of ss and an fittings haha.

You not keepin the AC are you? lool

[C-unit]

No way I am ditching the A/C!! i am trying to make it fit right now with custom lines.

[louis110]

dear GOD! Thing is gonna be a beast!

[C-unit]

Not sure how much it weight but my target is around 2700-2800Ib.

Got more work done over the last week.
We finished off all the pluming. We were going to use 3/8 aluminum hardlines all the way under the car as feed/return. However we ended up going with 20ft of AN-6 SS braided hose for safety reasons.




Also mounted the Tomei Fuel Pressure Regulator with the gauge. The Tomei unit only have one side port so we drill out the other side and thread it. 90% lines are done. All it's left is putting the surge tank back.



While the car is on the hoist, we also mount the custom RE-GK FD3S CF diffuser.
Mocking up with the R32 top secret diffuser side pcs.


We did some trimming to clear the diff and subframe.


aluminum mounting brackets. It looks flimsy but it did only up the diffuser pretty well. I have 4 brackets mounted to the fuel cell and subframe. To be honest, the diffuser is more for show than anything. I don't think it'll create any downforce. lol


The under side


Just missing the vortex generator...ricer much??



I'll be picking up my cremaic coating parts tomorrow! i never feel this motivated. Big thanks for Fortress Fabrication and The Independent Speed Shop

[magular]

i love the diffuser, i think without the 2 little pieces in the middle would be better look , the opening will look wider and cleaner... but then again it doesnt look as badass either... preferance i suppose. but im stoked you got a diffuser!!! if its just for show haha. but its sweet none the less looks like rear quarter's are all nice and patched up

[frankiman]

woah, that diffuser is so different from the r32 one

looks alot more agressive, i love it

[knate]

Is that flares on your fenders? or just a massive pull? Looks badass!

[cobrAA]

woah, that diffuser is so different from the r32 one

looks alot more agressive, i love it

agree!

[C-unit]

I love those middle fins..such GT car looking

Is that flares on your fenders? or just a massive pull? Looks badass!

It's a massive pull. I can fit 18x11 -18 with 265/35R18 -3degree camber.



and since when did frankiman become a moderator?? lol

[magular]

i remember the professor sp1's (if im not mistaken) were 18X11 et 1 or something plus your spacer to make -18, but why did you sell those? or you havnt sold them and you are going back to those?... or got other wheels inline to fill those nice fenders?

[felix yuen]

i love the diffuser, i think without the 2 little pieces in the middle would be better look , the opening will look wider and cleaner... but then again it doesnt look as badass either... preferance i suppose. but im stoked you got a diffuser!!! if its just for show haha. but its sweet none the less looks like rear quarter's are all nice and patched up

disagree... i love the middle part !

[C-unit]

i remember the professor sp1's (if im not mistaken) were 18X11 et 1 or something plus your spacer to make -18, but why did you sell those? or you havnt sold them and you are going back to those?... or got other wheels inline to fill those nice fenders?

yea..they are -1 with a 18mm spacer. I sold them and that was a stupid mistake. I'll get another set this summer!

[MattiasJacobs]

This build is insanity. I can't wait to see the final outcome!

[C-unit]

Long time no update and I almost forgot I have a build thread here!

Car is almost complete beside the tuning part. We can't get it to run with the up rev stand alone so we will probably go with Vipec i88.



For those who haven't seen my built. It is running a 2008 VQ35HR with twin GT2860RS, 370z 6speed gearbox and RWD.

[Fred-R]

any pics of the whole car?