It's just a little turbo

[leeaspin]

doing the winter tear down and decided to take a picture of the turbo....shaftplay is ZERO.....gotta love the good old trust turbos

[leeaspin]

Removing the plenum....holy S*** what an absolute nightmare with the motor in the car....I have all the bolts plumbing and electrical off and I cannot for the life of me slide the plenum off the studs....anyboy have any ideas? Im using a bunch of screwdrivers as prybars and prying evenly but no go!

Also picking up water meth kit today

[TW]

are you sure everything is off??

[leeaspin]

everything is off....
this is how far I have pulled it off

[leeaspin]

bonus pictures....water meth kit picked up

[Super_Dude]

I would recommend running 6 individual jets. You won't get even distribution and may damage the first few cylinders.

[mitch32]

I would recommend running 6 individual jets. You won't get even distribution and may damage the first few cylinders.

Even if you put the nozzle before the plenum like sr20det and honda guys do? I want to do the same thing but 6 individual nozzles, I think thats more then whats needed.

[leeaspin]

Plenum is now removed....what a pain that was

As for super dude.....I have been on supra forums and a lot more guys use the meth than the skyline owners....using one jet is perfectly fine....even talked to an aem rep about this and there have been no problem with even distribution if you mount the nossel in the correct location and angle

Couple pics of the plenum removed

[Super_Dude]

The stock plenum won't distribute air evenly, let alone a liquid. Check the evo forums and you will find a few guys who have burnt up there first two cylinders and the other two are fine.

if your shooting it in just for a safety factor then it will be fine. If your tune depends on your meth and your running more boost/timing than your fuel can deal with you will end up with problems.

[leeaspin]

well if I have problems with 1 meth nozzle I will let everybody know.....but 6 nozzels is obsurd....pretty much just throw 12 injectors in....thanks for the input but I will stick with 1 nozzel

[LuckyGTR]

i have a OS GIKEN R4C MULTI PLATE CLUTH KIT FOR SALE CURRENTLY IN MY CAR BUT WAY TOO GRIPPY FOR MY CAR I HAVE A DAILY DRIVE THIS CLUTH KIT IS MADE TO HANDLE WAY TOO MUCH POWER !!!

I CANT DRIVE MY CAR in the city its not a daily drive cluth kit its pissing me off (iam at 408 whp) wit 2x gt2860rs i defenitely went all out on my cluth kit for nothing

clutch kit is brand new (not even 4000 km) i have receipt from RHD JAPAN WIT purshace date and everything

cluth kit was 2700 now 2000$ brand new

i let mine go for 1400$ + shipping

here some picture of the baby




wen i receive my kit


picture of how baller it is install on the car from a under view :P


neways 1400$ is 600 less then on RHD japan + u dont have to pay long shipping + bording fees

[leeaspin]

may have to snatch this from ya....is it push or pull type?

[leeaspin]

So I got my AEM water meth kit and finally got it somewhat installed...Have all the wiring done and tank+pump mounted...all I have to do now is put the dash all back together and tuck all the wires going to the trunk and under the dash....heres a few pics of the install....

The kit itself


Charge pipe drilled and tapped


Charge pipe with nozzel attached


Tank + pump mounted and installed


Heat wrapped line going to charge pipe


Meth line running from trunk to charge pipe


Dash coming apart for mounting Controller + LED


Will finish tucking wire and such this weekend...finished photos will come....watch out for pro mountage of the meth LED indicator light

[mitch32]

Which charge pipe is that?

I was thinking about mounting it after the intercooler either right before the plenum (upper charge pipe) or the one right after the intercooler.

[NickMy]

better have it on the road when mines on the road in the summer there Lee lol