Project Horny

[flipridah17]

g luck man please post updated pictures when u can..

[TW]

anyone know how to get a hold of william @ Speed Architech?

i got a hold of him via myspace!

[felix yuen]

do u have his email ?
i don't have my space !!!

[TW]

i dont have his email actualy, ive only spoken to him through myspace to date,.

[Brewpubeaver]

do u have his email ?
i don't have my space !!!

i gave it to you already, but if you missed it..


ej25jdm@gmail.com

[felix yuen]

oh yeah
that was it
i emailed him
did't get a reply yet
but thanks anyways

[mcfly]

-head shims, (in the process of finding and making custom sized shims for my head applications)

why not buy them...

[felix yuen]

because you cannot buy unless you know what size u need
and i ordered a set of tomei 1.7mm shimes to mesure toke 3 weeks for them to make ... sucks

[mcfly]

because you cannot buy unless you know what size u need
and i ordered a set of tomei 1.7mm shimes to mesure toke 3 weeks for them to make ... sucks

you still need to know what size you need even if you are custom making them....your logic doesn't make any sense here.

[felix yuen]

thats why i am in the process of measuring them now..

[Southie]

ok well i just spend 30 mins off my life reading this entire thread and well :bow down: :bow down: im not worthy, im not worthy. lol. very impresive and now im hooked, looking for an update. lol

[felix yuen]

ok finally more work is being done
made new brake lines and relocated the proportioning valve into the inside of the car, it will be like the N1 cars where they have it at the driver side air vents

tomei diff installed (it was a bitch)

oil pan is being finished by machine shop....costing over $1000..****...gay ******* RB30....

[felix yuen]

re-made the brake lines / relocated the poportioning valve and sump came bak from the machine shop...yay

[felix yuen]

picture updated!!

finally more picture updates !
well it is finally look more like an engine, oil pan came back from machine shop,
and after all this stuff is done, i now realized even tho u pay alot of money for someparts. it still won't fit properly and everything u buy, HAS TO BE CUSTOM FITTED to have a 100% perfect fit!
here is why !
$1000 greddy intake manifold for example, the ports dont line up to the throttle as the holes for the bolts are drilled slighty off, heres wat we had to do







then who saids rb3o are a direct bolt onto rb26? if u say it is....u must be retarded as on our rb30/26 conversion, every rb26 part that is bolted to the rb30 block has to be customize, head bolts dont line up, tranny, sump, etc all has to be redone inorder to be fitted to the rb30 block perfectly
ex-mani/gasket has be grounded/trimmed at a few spots to clear
here are pictures:









here are a few random pictures:










differencese between the new greddy t88 ex-mani and old...look at the size!!

[JZ]

Don't let up Felix! Keep at her!!!!