R32 RB26 engine removal

[jonask]

I pull mine 2 months ago (its a gts-t)
Pull it from the top with the transmission, no damage, very clean and not very hard to do (I'm not a mechanic).

as you can see on the picture the car is not very high from the ground.
I removed :
- turbo (only to be safe)
- shifter (so it can fit under the car)
- radiator (a must)

You have plenty of space, I even kept the AC rad.

This picture shows then engine right after the pull :

[Armanio]

Skip ahead ot the 6:00 minute mark.

http://vimeo.com/92593607

I was bord and watched this earlier todya, thought it might be marginally helpful. i'm sure if you checked there are videos of rb's being pulled. Also maybe check Sean's GTRUSA blog, I wouldn't be surprised if he has tips there since he's built so many.

Also, this:

http://www.skylife4ever.com/2011/01/pulling-rb26-motor.html

hope that helps a bit anyway.