11 second money pit- R34 NUR build

[falcon]

Was going to put it in, but couldn't due to lack of 3 heater hoses that need to be molded. On order from FEAST express...Honestly I can't wait any longer lol. There is absolutely nothing else to do but pop this guy in the engine bay now.

Engine hoist looking disappointed as it didnt' get a chance to catch any engines today =[.

lol... good luck just "popping" it into the engine bay.







oh man.

[kelaog]

Update: Engine did pretty much pop into the engine bay, very easy. Also the tarnsmission went in flawlessly in one try...But then we found out my clutch sleeve was too long, bearing was right but the sleeve was wrong =\ We had it bolted down and everything =\ Fail!

Waiting for new sleeve/bearing now... Will be on wheels at the end of this weekend...Driveshafts are easy

Note, camera is still broken =[....

[kelaog]

Progress

Everything is done. I just have to wait until wednesday before ZTUNE can put a base tune on my car. They apparently lent there software to another shop and they broke it =\.

So car is going into ztune for basetune, and the new crank pully/ATI damper

I will get a walkaround video with my camera as that feature still works, just no pictures =\ Stay tuned !!!!!! It's on wheels again my god.

[kelaog]

As per above, here is the video Sorry for craptastic quality. I'm a one man show.

[RyanGTS-T]

1x Synapse Blow off valve now!

And that video was crap, lol j/k. I cant belive how much you've done since I was over on sunday night.

[Chris_RB]

I want to hear that baby running~!!!

[JBNR32]

1x Synapse Blow off valve now!

And that video was crap, lol j/k. I cant belive how much you've done since I was over on sunday night.

Why does everyone sack ride synapse so hard?

[RyanGTS-T]

Why does everyone sack ride synapse so hard?

What? Kelaog just sold me one of his two synapse. And even with a vaccum leak, it still work way better than that stock blow off.

[falcon]

Update: Engine did pretty much pop into the engine bay, very easy. Also the tarnsmission went in flawlessly in one try...But then we found out my clutch sleeve was too long, bearing was right but the sleeve was wrong =\ We had it bolted down and everything =\ Fail!

Waiting for new sleeve/bearing now... Will be on wheels at the end of this weekend...Driveshafts are easy

Note, camera is still broken =[....

lol, thats what I mean. Same thing happend with us, we "pop it in" and then a huge bunch of retarded hurdles to jump over that you didn't expect. Hell, we had to take half the engine back apart to fix seals/leaks and whatnot (new seals too!)

[kelaog]

lol, thats what I mean. Same thing happend with us, we "pop it in" and then a huge bunch of retarded hurdles to jump over that you didn't expect. Hell, we had to take half the engine back apart to fix seals/leaks and whatnot (new seals too!)

Well we had a huge vacuum leak because we didn't clamp down the hoses we used and were using hose that was too big. It was just to test it. BOV works great, even without the boost source hooked up.

[JBNR32]

What? Kelaog just sold me one of his two synapse. And even with a vaccum leak, it still work way better than that stock blow off.

I guess you gotta make sure its not sucking air under vaccum, sounds weird thats all.

[RyanGTS-T]

I guess you gotta make sure its not sucking air under vaccum, sounds weird thats all.

Mine sounds fine, just have to connect your two vaccum lines up and your one boost line and your good to go.

[kelaog]

Some media for everyone to enjoy

Video and some pics.

http://www.new.facebook.com/video/video.php?v=22577277835#/video/video.php?v=22577277835

Cams It sounds much cooler in person, camera didn't get a good job of that.

[EtienneGignac]

Not everyone is on facebook....

Looks nice ! Now if only that twin turbo pipe would be gold too...

[RyanGTS-T]

LoL, engine bay looks differet since that photo. Catch can removed, optima red top installed. Broken leaky Billion rad cap garbaged and replaced with stant 16psi cap. I cleaned the rad spray of the cam cover and rad twice and upper coolent line trimed and straigtend out.


Things left to do:
-Powersteering belt, and reconnet lines
-Drain coolent and replace with straight redline Water Wetter
-Waiting on ecu to get this thing really moving.
-Adjust starter