C-unit's NuB GTR project o0o!!

[RABBIT]

looks like there would be no room for the turbos other wise.

[C-unit]

finally back on track. buddy finished 1 side of the intercooler and all pipings. Still need to some final touch up and new couplers.

Also bought a new camera so no more iphone photos.

It'll be running on Map sensor with proEFI pro48 standalone.






With the Intake install. (Not using that HKS filter, I am going with the AEM dry filter)



Rad will be mounted in an angle to clear everything.

[C-unit]

fuel system is getting close.

15Gal cell with sender unit
Twin Walbro 255lph pump
custom aluminum hard lines.

[Messiahlee]

Looks nice and custom

[C-unit]

Custom 304 SS surge tank.
We still have to drill out the tank and weld the bungs on.




Got the lines flared and such.




Pump brackets are welded on the on aluminum plate.

[felix yuen]

Sick.......... U should do v-clamps instead on silicon hose
Time to step it up man!!

[C-unit]

not as rich as you bro

[gtstjason15]

iight so i read your thread right threw the other day lol your crazy man this is gonna b one hell of a car! at the end wont b much of a gtr left! lol but i like it keep up the updates !!!

[C-unit]

Long time no update but that doesn't mean I stop working on the car!

i've been ordering/collecting parts for the past 2 months. Any how, here it is!

Final check on the downpipe and manifold before taking it to ceramic coating.


Everything is ready for ceramic coating.


Wheels has been refinished but I might want to sell them for something abit bigger. If you are interested, please pm me.
Nismo LMGT magnesium
18x10 +20
Toyo R888 265/35R18
comes with full center cap and stickers.


Bought abunch of AN fittings for turbo and coolant lines.


And one day I was preping the enigne bay, I discovered some rust near my strut tower. i was mad and I cut it out. Then I took it to my buddy for some reinforcement. You can see the hole i cut out.



Some plate and rollcage tubing. 2hrs later:


Primered


KH2 base coat


Clear coat..i know it looks shitty. First time painting so give me a break. I will wet sand and polish it out.


Temp BBK for now before my Project Mu comes in.
brembo 6pot 355mm 2pcs rotor.
I also use the gator bedliner for my wheel well. Very nice stuff. easy to apply with brush. Super durable finish. Way better than the rubber under coat i used before.


All brackets painted as well.


Nice and fresh for the VQ




Rear are done as well..bedlinered wheel well
Brembo 4pot BBK 345mm 2pcs rotors


Fail body work atempt


Car is towed to body shop today for rear fender work.
and appearently with the pull fender..the 18x10 +20 becomes fail fitment.


Side shot


Body work will be done and car will be wired up next week!! VEEEEEEEEEEEEEE

[Messiahlee]

Looking good man
Can't wait to see more

[RABBIT]

Ouch sorry about that stance

Sent from my HTC Magic using Tapatalk

[felix yuen]

thats why u shoulda kept ur old wheels and used a spacer for ur brakes

[C-unit]

^ i know...i m in the market now for some cool fitment wheels....

[C-unit]

**** load of fittings, hoses and labour, this is the result

AN-4 oil feed
AN-8 oil drain
AN-6 coolant feeds and drain




Still need to make an adaptor.




AN-8 bung welded to oil pan


Engine rear water neck.
AN-8 reroute
AN-10 heater hose
plugged throttle body water lines

[magular]

looks pretty crazy, cant wait to see it all together, will be insane!!!

doing super good quality work though, nice to see.