Wheel fitment thread.

[johnZ32]

i really like the look of the gr-a or even the konig feather in black

and what do you mean stick out more?

[flipridah17]

thinking of picking up some rotas GR-A's but am total noob for wheel fitment.
i cant find the exact bolt pattern for the GTST type-m... but my question is, will this size fit? 17 x 7.5 5 x 114.3 +45

Keep you stock wheel if you are going for the size above. You will be wasting your money with that sizes..

Why not go with 17x9 +25? You can fit these sizes fairly easy..

Remember the lower offset you go the more it will stick out.

http://www.wheeldude.com/catalog/product_info.php?products_id=6416

[johnZ32]

thinking of picking up some rotas GR-A's but am total noob for wheel fitment.
i cant find the exact bolt pattern for the GTST type-m... but my question is, will this size fit? 17 x 7.5 5 x 114.3 +45

[DreadedFist]

Im running 17x8+ 25 front and 17x9 +18 rear and it looks really nice, back tires come out of the wells like 1 cm, real clean. 255's on the back too.

I don't have anything to add, since I'm running stock wheels and tire sizes, but brody's 255's look really, really pimpin' when you're standing behind the car. Pretty much the best size, imo.

[jessem]

I have 235/45s on my 17x9 +15 wheels, No rubbing and pretty low, lips are rolled with a little bit of pull. Heres me issue, I have some 255/40s that i would love to put one once these 235s are done. Think i can make it happen without too much more fender loving? Has anyone run anything similar to this on a gts before?

Bobbo

Your fitment might be similar to mine other then being an 18inch, have you set your car up?

[MNW]

Hi guys,

I have an opportunity on a set of MB motoring Weapon 17X9 +27 . From what I've read on this topic so far, I am not too worried about fitting. I think it will fit just fine with no roll but I can always roll a lil bit if needed.But I am not too fond on the ''wheel sticking out'' look. I'm thinking it will sit pretty flush and will look good. What you guys think ?

And any opinions on this set of wheel ?

I ran those wheels on my gtst at one point, they won't stick out so you don't have to worry.

[slitcher]

Hi guys,

I have an opportunity on a set of MB motoring Weapon 17X9 +27 . From what I've read on this topic so far, I am not too worried about fitting. I think it will fit just fine with no roll but I can always roll a lil bit if needed.But I am not too fond on the ''wheel sticking out'' look. I'm thinking it will sit pretty flush and will look good. What you guys think ?

And any opinions on this set of wheel ?

[bobbo]

18x9.5 +20 Work CR Kai in gun metal with Dunlop Direzza StarSpec 255/35/18.
Pardon the wheel gaps and no calipers. Just a test fit as it's still on jack stands for awhile longer until the rest of the new parts arrive.

http://smg.photobucket.com/albums/v150/tegguy/?action=view&current=newwheels001.jpg&newest=1

http://smg.photobucket.com/albums/v150/tegguy/?action=view&current=newwheels002.jpg&newest=1

http://smg.photobucket.com/albums/v150/tegguy/?action=view&current=newwheels003.jpg&newest=1

http://smg.photobucket.com/albums/v150/tegguy/?action=view&current=newwheels004.jpg&newest=1

[C-unit]

^ what are the offsets??? just curious because they don't look very aggressive for such width.

[theDOM]

mine look like this

18x9.5 front
18x11.5 rear

on veilside v racing andrews (custom satin black)

[Brody_Howell]

Im running 17x8+ 25 front and 17x9 +18 rear and it looks really nice, back tires come out of the wells like 1 cm, real clean. 255's on the back too.

[jessem]

The 18s would look the best but you gonna be doing some big roll to fit them in the back, theres aguy on here that did that size if i remember right and they stuck out lots.
The 17 by 10s would look really good too though, thats your better option i think.
Im gonna be fitting my 17x9 +15s soon, and they probably fit the same as the 10 wides with +25 you mentioned.
As for clearance you should be ok for the coilover, if anything it might just touch.

[lord_shadow_tck]

Hello, I would like to get an agressive setup for my GTS-t, and I was wondering if it would fit. Actually my car got r32 GTR gold painted wheels and another set of sportmax 18x8,5 +35, but I want to get some real wheels hehe. On the front I have +15mm D-max Fenders, but the rear is still stock, and I dont care of rolling fenders, but would like to pull as less as possible

Thinking about a nice set of 18x9.5 +12 or 17x10 +25 (thats for all around) but I'm wondering if the 10 inches would rub on the coilover or anything else when turning.
But the 10's might fit better on the rear, since they would be retracted of 7mm on other position. Oh, and would put some 235 or 245 on the front (depending of the clearance) and 245 on the rear if it's not too narrow!

Current setup with 18x8.5 +35 with 225/40/18


Other setup with GTR wheels (16x8 +30 with 225/50/16 on the front and 215/55 or 60/16 on the rear (tires for smoke)





Feel free to post any helping comments!!!

[evolveR32]

rimtuck.com is very easy to use you guys should check it out. They have a very large database for wheel and tire specs. Most of the cars have aggressive wheel setups. I enjoy just looking at the cars. Also you can search the database for very specific specs.

Oh ya by the way rolled fenders makes everyone happier, Sunkin battleship wheels FTL!!!

[Corey]

there was also no flare at all with the weapons and just a slight roll