Wheel fitment thread.

[Corey]

the pictures with the weapons were from before i got my coilovers , she's lowered now lol dont you worry im scrapin ass down the street the way it should be!

[C-unit]

You need to lower the car more man...but for the size you suggested, it whould fit with 225/40R18 with a slight more pull/flare on the fender.

But yea..lower ur car!!!!!!!lol

[Corey]

the first couple pictures are of my 17x9+17 weapons and the last picture is of my friends 17x8+12(i think)mantaray meshies, next will be of some 18x9+22 and 18x10+22 work equips!

[flipridah17]

nice ride jmak.. So how is the ride quality on tein flex?

[beacher1B0]

I wasnt going to post until I took some nice photos but oh well.

Please excuse the dirty car and low quality pics, I took these immediately after mounting. And yes I know I need to go lower, just a little more roll 1st.

Origin Labs DNA 01 17x9/17x9.5 +30mm. With 5mm spacers.
Falken FK452 235/40/17 and 245/40/17.










Thanks to Daryl for turning me on to these.

Mike.

[jmak]

Finally got my wheels! but there's still too much wheel gap =(
gts4 with no body work done

tein coilovers (type flex i think)

work emotion xd9 factory gloss black
18x9 +20 all around
yokohama avid 225/40/18

[Corey]

looking at getting a set of work equips for my 4 door gts-t. wheel specs are:

18x9+22 fronts
18x10+22 rears

Does anybody run anything like this? right now i have 17x9+17 all around and they fit with just a slight roll of the fenders, i was thinking with the 18x10 i could just do a slight pull with the fender roller and they will fit snug. anyone disagree?

[PL_GTR]

nice rims, but you should change the colour to black or gunmetal

[Chewy]

Can't take credit for this since it came this way, but I can be credited for seeing how classic CR Kais are, even if they are played out. Next I'll be trying to fit some 18x10 NS-06's in the rear...BTW, Charles, let me know when you get that container on it's way.

Emotion CR Kai
17x9 +18 all around
SS595's out back
Advan Neova's up front.

[GTS4-R]

^^^^ AMEN!!!!!!!!!!

[BurlyR32]

Looking to put a set of rims, but havent seen any specs that sit quiet right for what I am looking for. HCR32 GTS

8 or 8.5 with a +12 or so for the front
8.5 or 9 with a +38 or so for the rear

Would like to have 215 or so on the front, and 235 maybe 245 on the rear.

Any suggestions on it? Would like to avoid doing any rolling... But I am willing to do a bit if needed.

Buy nice wheels and fit the car to them. You will be happier in the end. Nothing less than 9" wide and no more than +20 offset.

[M13]

I have:

Desmond Marquis Reggamaster EVO

17 X 9 18+

235/45/17 rears and they are stretched, rubbed with stock fender line so rolled and now it's not rubbing. I want to go 255, yes?

[PL_GTR]

i have a set of

Enkei RP01
17" 5x114.3
17x8+38

what size of tires can i go without rolling fenders 245/45/17 or 245/40/17 in the back and a little skinnier in the front.'

or would rolling fenders actually make it look better, with some bigger tires

[Kaash]

Looking to put a set of rims, but havent seen any specs that sit quiet right for what I am looking for. HCR32 GTS

8 or 8.5 with a +12 or so for the front
8.5 or 9 with a +38 or so for the rear

Would like to have 215 or so on the front, and 235 maybe 245 on the rear.

Any suggestions on it? Would like to avoid doing any rolling... But I am willing to do a bit if needed.

[C-unit]

nice, saw your car on zilvia intially!! just go 2" lower!