Frankydodo 2nd gtst (montreal)

[Skym]

I like.

Group-A RB20DET is around 4800rpm (up to 500hp at engine), so that's really good boost response (rpm it reaches full boost). Also nearly 400hp at engine, roughly what one of the Group-A RB20DET engines produced.

With some E85 (or E85 / pump gas mix from say Martini), could extract 50hp+ more at same boost level (tune, fuel system to suit fuel).

[frankydodo]

tuner says he could get a little more out of the setup but the only thing is my clutch when ill have my new clutch we'll see also here in quebec we dont have e85

Envoyé de mon SGH-I747M en utilisant Tapatalk

[jonask]

very nice setup ! I managed to do 305whp and 304 wtq @ 18 psi on a mustang dyno. I'll look into your build to make some improvement
I would love to see your car in real, are you comming sometime at icar / st-eustache ?

do you worry about 20 psi ?

[frankydodo]

yes going tu icar sometimes. and no dont worry about 20 psi at all. engine is healty and im not the kind of guy that boost at every street corner or drift in every highwag exit lol.

Envoyé de mon SGH-I747M en utilisant Tapatalk

[Skym]

tuner says he could get a little more out of the setup but the only thing is my clutch when ill have my new clutch we'll see also here in quebec we dont have e85

Envoyé de mon SGH-I747M en utilisant Tapatalk

Twin plate Nismo clutch.

But can mix Martini (super turbo fuel) with pump gas for over 100 octane fuel -

http://www.martiniracing.com.au/index.php/our-products/race-fuel

[frankydodo]

Getting my clutch installed today! And finnally installed my ls2 coilpack



Right now they have little spk plug wire going directly on each plug so i cant put back my coilpack cover but i will try to find a set long enough to but back my coilpack cover on and passes wire on the back of cover

[steveo1502]

[frankydodo]

didnt think of that! you made it?

Envoyé de mon SGH-I747M en utilisant Tapatalk

[steveo1502]

Yeah , I just cut little notches for the wires

[frankydodo]

Just get back my car from clutch installation. Is it normal that the friction point is like 1/2 inch. like as soon as i let the clutch go it grips. Its my first time with an aftermarket clutch on my car. Also gear are a little harder to enter. I installed a SPEC stage 1 clutch.

[NoLimit0596]

air pocket stuck in slave cylinder or just need to adjust pedal free play

[frankydodo]

i adjusted the clutch pedal and managed to get an inch or so of play before it grips. will try to bleed slave.

Envoyé de mon SGH-I747M en utilisant Tapatalk

[frankydodo]

no more skyline. make a 180 degree turn for a car i always wanted. fox body baby!



gettin ready for rock throwing lol.

Envoyé de mon SGH-I747M en utilisant Tapatalk

[future_R34]

"Face palm" where did the skyline end-up?

[frankydodo]

in the hand of the mustang dude lol

Envoyé de mon SGH-I747M en utilisant Tapatalk