Compatible Parts List For GTS-T / TYPE M

[beacher1B0]

Also guys, Does any know what Nissan has the compatible rear wheel bearings as my/our HCR32? Im pretty sure rear bearings in a 300zx = GTR, but Im unsure of what is equal to my HCR.

To answer my own question again. HCR Rear Wheel Bearing seems to be equal to S13, S14 , cefirios and R33 Gtst.

[Rblove26]

Hi Guys,

I have just used the following parts and they worked great!


Spark Plugs - NGK Iridium - BCPR6EIX-11 Stock # is 4919 from NAPA

Oil Filter - 15208-53J00 - From Nissan

Fuel Filter - 16400-53J10 - from Nissan ( direct fit )

Master Clutch cylinder rebuilt kit ( everything included ) 30611-10V26 from Nissan ( It is from a 90-91 Nissan Pathfinder )

That is it for now, I will post more as the repairs continue.

Thanks,
NBSKYLINE

hey i would just like to confirm that the plugs you mentioned are a factory replacement for a Rb25det...or should a keep searching for a better plug? my car is still stock
thanks

[Casperly]

I finally found that the lower control arm coming from an infinity q45 fits perfectly...note this!

which year? thanks

[Boyscout]

anyone know x-ref for master cylinder?

[redneck_ricer]

clutch fan

my clutch fan is seized what other fans fit........... 240sx or 300z????

[m_melen]

does anybody know if the ka24 (s13) stock alternator is an upgrade to the stock rb20 alternator?
i want an alternator that will put out more juice. suggestions on how many amps i should get?

[johnZ32]

So after doing some searching and finding nothing, does anybody know if there is an interchangable USDM starter assembly?

[beacher1B0]

does anybody know if the ka24 (s13) stock alternator is an upgrade to the stock rb20 alternator?
i want an alternator that will put out more juice. suggestions on how many amps i should get?

I have read somewhere a Nissan Quest alternator is a upgrade.
Also, most rebuild shops should be able to beef up your Rb20 alternator with a rebuild.

[rak123]

BMC or CMC? the BMC crosses over to a 92 pathfinder i beleive, no idea about a clutch CMC though

anyone know x-ref for master cylinder?

[m_melen]

I have read somewhere a Nissan Quest alternator is a upgrade.
Also, most rebuild shops should be able to beef up your Rb20 alternator with a rebuild.

awesome, thanks!

[ARC240]

Clutch slave cylinder (RB20DET 5spd M/T) ----> use CSC to fit 89-94 240SX (S13, KA24DE OR KA24E w 5spd M/T)

...about the Quest alternator, I know those fit with some modification, I was given a USDM Nissan rebuilt alternator in exchange for my old RB20 one, I have no idea what it's from, but it works, I'll check it out.

[89Baysideblue]

What o2 sensor fits the RB25DET Series II
ive seen two different bosch numbers for this and im confused?

[Nick41]

Just had my power steering rack boots replaced yesterday, direct fit from a '91 300zx. Napa part number was NCP 269-1577. (For 1990 GTS-T)

[sleeth21]

i need both front outer boots. My guy said its prob easier to just get new side axles. does anyone know what will fix. Maxima? its for a 92 gts-4

[HIGHFIV5]

Clutch slave cylinder (RB20DET 5spd M/T) ----> use CSC to fit 91-94 240SX (S13, KA24DE w 5spd M/T)

...about the Quest alternator, I know those fit with some modification, I was given a USDM Nissan rebuilt alternator in exchange for my old RB20 one, I have no idea what it's from, but it works, I'll check it out.

Yep. Nismoparts sent me an RB25 clutch slave and it didnt fit then i looked over at my tranny from my KA24E and the slave looked like itd fit and sure enough
lined right up!