Compatible Parts List For GTS-T / TYPE M

[cooke24]

O2 sensor ntk 24039 direct fit for rb25det just put her in today

[whiteboy87]

no water pump gasket. its rvt sealant. no other water pump i know of. just get one for a skyline a new one is like 100 bucks.

[tryingtobebest]

SEALS

Lookin for:
- Front Main Seal
- Rear main seal
- Cam seals
- Front oil pan/dif axle seals

Need them badly

[pmurr181]

Anyone know if gts-t and gts4 tie rods are the same? Front or Back or both?

Thanks

[klys]

Well I was looking for HCR32 gts-t single pot brake pads and that info seems very hard to find.

beholddd!! here it is:
Front brake pads: AY040-NS929
Rear brake pads: AY060-NS008

NOW WERE AN i BUY SOME??

[jumpei]

Will 240SX's clutch slave cylinder work for my 91 GTS-T??

[whiteboy87]

yes but you need to make a new hard line, really easy to do with a tube bender and a new line from any auto parts store.

[jumpei]

actually, I am getting RB20's clutch slave cylinder(30620-20U23) from local Nissan dealer.

[stanaz]

replaced p/s belt today (RB20DET) size: 372K4 worked really nicely, the 365K4 for the 300ZX was a bit short i found.

[stanaz]

the NGK iridium plugs BCPR6EIX-11, canadian tire part number 018-4701-8

[whiteboy87]

rb20 clutch slave is way more money than a 240 one. i was quoted 240ish for a new rb20 one and 45 for a 240sx one.... but for anyone who enjoys getting bent over for owning jdm bend on!

[Skym]

Don't know if it's been mentioned, as haven't read all the pages. 300ZX TT brake master cylinder seems to fit R32 GTS-T if you want a upgrade for better braking and said to have shorter pedal throw. Also said to be same size internal wise as brake master cylinder that's used on R33GTR, R34GTR.

[DiiCii]

s13 toe arm boots fit my hcr32, both 89 if that matters.
pics

[jinglebell17]

cool thread. i have posted it before on another thread but this one seems like it would be more effective.

does anyone know if a 240sx (s13) window regulator will fit in my R32? i know exactly what my regulator looks like from top to bottom so even if anyone knows where to get a picture of a 240sx window regulator?

[89Baysideblue]

after reading 14 pages on this thread it doesnt seem very clear what balljoints and tirords i can use on my GTS-T

Maxima A32?
300zx?
Infinity G20?

can someone she some light on both uppers and lowers/inners and outer for this??

thanks