Needs me a Rad...

[Wingnut]

Looking for a new/new-to-me Rad. Oem fittment preffered. Along the lines of a Koyo copper or similar. Let me know what you got!

Thanks

[PH_Motorsports]

X2 - It doesnt have to be oem thickness, as Im changing fan setups
Koyo Aluminum would be ideal. Something local would be great too

Bump for Wingnut & Bump for me

[mightyrocker]

i have one koyo left!

[Daryl @ RightDrive]

I sell Koyo rads,here are some prices:

Just to verify, these are the part numbers for the rads I quoted, they are different:

These are all Koyo rads from Koyo Japan.
Type S (2 layer copper) 32mm (1.25") #ＰＡ０２０２１４ : 34,650 JPY
Type R: (3 layer copper) 49mm (1.92") #ＫＡ０２０２１４: 69,000 JPY
Type Z: (All aluminum) 53mm (2.086") #ＫＬ０２０２１４Ｒ: 69,000 JPY

For comparison, the stock rad is 25mm (0.98").

Shipping is cheap, around 6,000 JPY for 5 day air.
I can give both of you guys a discount off of the above prices as well, please PM for more details.

[JNS Performance]

Hey Anthony and Peter,

I have some Koyo's in stock. I can ship it out Monday with the bushing kit.

Price is $420 shipped and taxed in for Anothony and $440 shipped and taxed in for Peter! And Peter I can hold yours till the oil cooler is in a join ship them. PM me for the rate on that.

Please remember these are FULL aluminum and 3" thick.

Let me now if your interested guys

[Wingnut]

I need to see some pics of the thick Koyo mounted on Kurt's car before I jump the gun... I HIGHLY doubt I'll have the room to use the FAL fans. I'm going to see it I can rotate the PS lines....

[PH_Motorsports]

I need to see some pics of the thick Koyo mounted on Kurt's car before I jump the gun... I HIGHLY doubt I'll have the room to use the FAL fans. I'm going to see it I can rotate the PS lines....

similar situation, will check it out shortly

Braden, the unit your offering called "Type Z: (All aluminum) "

[mightyrocker]

similar situation, will check it out shortly

Braden, the unit your offering called "Type Z: (All aluminum) "

yes the unit we are offering is the type z


i have some pics but they are in my car, and my car is blown up in sw calgary, i am going to get it towed tonight and i will let you know.

[Bruizer]

the aluminum type Z and copper type R are both the same price. Why would the aluminum be better? Is it because the aluminum is lighter but the copper cools better?

[PH_Motorsports]

the aluminum type Z and copper type R are both the same price. Why would the aluminum be better? Is it because the aluminum is lighter but the copper cools better?

http://www.dewitts.com/pages/whyaluminum.asp

[Bruizer]

Good read. I still don't see why the copper is the same price as the aluminum, not that it really matters, I just can't see why they don't drop the price of the copper one or raise the price of the aluminum. There must be more information...

[PH_Motorsports]

Good read. I still don't see why the copper is the same price as the aluminum, not that it really matters, I just can't see why they don't drop the price of the copper one or raise the price of the aluminum. There must be more information...

well my guess is material cost. at a scrap yard copper rads are worth more then aluminum rads.

[PH_Motorsports]

Braden / Kurt

Ive been looking at Koyo jpn offical site, and they only list making 1.2" & 2" thick Aluminum rads both type r & z .... Your offering a 3" thick?

[JNS Performance]

Hey guys,

Sorry about no response. I was gone over the weekend.

Rad is 2.25"" thick, its full aluminum. Part number is R020214.

thanks,

[Daryl @ RightDrive]

Just to verify, these are the part numbers for the rads I quoted, they are different:

These are all Koyo rads from Koyo Japan.
Type S (2 layer copper) 32mm (1.25") #ＰＡ０２０２１４ : 34,650 JPY
Type R: (3 layer copper) 49mm (1.92") #ＫＡ０２０２１４: 69,000 JPY
Type Z: (All aluminum) 53mm (2.086") #ＫＬ０２０２１４Ｒ: 69,000 JPY

For comparison, the stock rad is 25mm (0.98").

Shipping is cheap, around 6,000 JPY for 5 day air.