Project Modworks Monster R32 GTR

[bobbo]

I cant wait to hit the Maramichi 1/4mi this year Gotta teach you and Zacka lesson I think.

Ohhh. Look at me! I can drive in a straight line! That'll impress the girls. ��
Sorry I'll stop chuckin $hit now.

[r32_nate]

Well if its so easy, come with me this year and see how you do ;P

Actually Rob, where do you track Id like to try something bigger than AutoX

Ohhh. Look at me! I can drive in a straight line! That'll impress the girls. ��
Sorry I'll stop chuckin $hit now.

[r32_nate]

Started prepping some bottom end bits tonight. Helped gap my roomy rings tonight, and we gonna do mine tomorrow and assemble the rods and pistons together. My crank should be ready end of this week , fingers crossed.

[steveo1502]

Well.... That looks awesome, do a detailed thread, I'll look back to this later, I like that spline drive

How are you checking your bearing clearances?

[bobbo]

Well if its so easy, come with me this year and see how you do ;P

Actually Rob, where do you track Id like to try something bigger than AutoX

I used to do some drag racing in Ontario and out west. I just find the excitement, challenge and almost zen like feeling isn't even remotely close to the experience found on a road course.
We have a really fun circuit about 45 mins from here in Shubenacadie...

http://www.atlanticmotorsportpark.com

Some friends and I also travel to tracks in New York, New Hampshire, Quebec and hopefully this year to Ontario.
Trust me. There is NOTHING like hitting almost 260 km/h chasing a Porsche Cup Car down into the bust stop at Watkins Glen. Thats what a GTR is all about.

[r32_nate]

Well.... That looks awesome, do a detailed thread, I'll look back to this later, I like that spline drive

How are you checking your bearing clearances?

When I get to that step Ill plastigauge, but the machine shop checked everything over, and other that a .002 runout, everything looks good and needed nothing.

[r32_nate]

I used to do some drag racing in Ontario and out west. I just find the excitement, challenge and almost zen like feeling isn't even remotely close to the experience found on a road course.
We have a really fun circuit about 45 mins from here in Shubenacadie...

http://www.atlanticmotorsportpark.com

Some friends and I also travel to tracks in New York, New Hampshire, Quebec and hopefully this year to Ontario.
Trust me. There is NOTHING like hitting almost 260 km/h chasing a Porsche Cup Car down into the bust stop at Watkins Glen. Thats what a GTR is all about.

I heard Shubie had a track, Id love to try sometime maybe this year

[bobbo]

The first school should be May long weekend.
If you decide to put you man pants on and try it you've got a place to stay.

[r32_nate]

Had a snow day today, so spent more time in the garage getting things ready for my crank being done.

Gaped rings to CP's turbo spec, then installed pistons and rods together.













Then I finished shimming the head.

[bobbo]

Where did you get the shims?

[r32_nate]

Where did you get the shims?

parts numbers online then ordered at nisan. it was back ordered but they came in friday, and less than $10 each

[r32_nate]

ARP head studs have arrived, and the machine shop called and said my crank will be ready first thing in the morning Looks like Friday will be a bottom end assembly day. Feel free to drop by if ya want!

Anyone know off hand the torque specs for arp2000 rods bolts nd head studs for rb26?

[r32_nate]

Built the bottom end today, before pulling out a boxer enginein my buddies subaru and stripping it down all day. here some pics of the assembled bottom end. Also painted my oil pan, and torqued my oil pump bolts down.















And finally some 2jz vs rb26 porn lol

[r32_nate]

Got some more done today. Thermostat, oil pan, front diff, water pump, and oil pump.

[r32_nate]

blizzard again here toight, so i figured it would be a good time to watch fast and furious and build the egines with my roomy...



looking like an engine again....