GTR Wheel Fitment Thread

[Xanatos69]

BCNR33 Rota P45R Meister R

18X9.5 +20mm Rota P45R 2 hyper black 2 Royal Bronze (I couldn't make up my mind :P)
20mm spacers and rolled lips
Meister R Coilovers


By xanatos69 at 2012-05-01


By xanatos69 at 2012-05-01

[clandestine]

Quick question,
I have some Rays Gramslight wheels sitting around 17x8, would you 245/40r17 look good on these rims, or does it balloon out over the rim too much?

Thanks,

[bobbo]

That's is the narrowest wheel you would use with a 245 tire. Probably would be a little "balloon" like.
Ive found if you take the section width of the tire and have 1/2" narrower rim it looks perfectly square.

[quadracer111]

94 R32 GTR
17x9 +22 te37's
245/45/17 rubber
Cusco coilovers

Fronts rolled, rears would have to be rolled if I went lower.

[R32_Track_Junkey]

Bump for more beautys

[marcs13r32]

bump
!!!!!!!!!!!!
!
!
!!!!!

[clandestine]

I am picking up a set of

Enkei RPF1 18x9.5 +15 all around for my R32 GTR.
245 / 40 R 18 continental all season.

Will these tires fit fine on my car?

I am also aiming for 265 / 35 R 18 in the future.

Will need to know an answer by Saturday. TIA

[ck_chino]

hey man i have rays gramlights 57s
18 x 9.5 +12 with 245 40 r18
no problem what so ever, u are actually safer then me, cuz my rims are 3millimeter further out than urs.
oh and no body mods at all

I am picking up a set of

Enkei RPF1 18x9.5 +15 all around for my R32 GTR.
245 / 40 R 18 continental all season.

Will these tires fit fine on my car?

I am also aiming for 265 / 35 R 18 in the future.

Will need to know an answer by Saturday. TIA

[Rush_in]

17s look so small on an r32

[louis110]

I'm going to drop some coin on a set of Work Meister S1R's real soon but need fitment advice. I don't want to do any fender work, and I'm looking at going with 18x9.5+10 on 245 or 255/35/18 tires.

What I'm most concerned about is the +10 offset. Is this too aggressive? Should I stick with a +12 offset instead? Need I also worry about caliper clearance with these dimensions?

[garetth]

I'm also looking for some advice on the wheel choice, I'm looking at 18x10 + 18. Would anyone be able to let me know if rolling the guard will be required and preferably what the best tire size would be?

[boostedsi]

I just picked up a set or work equips 18x10 +10 and 18x11 + 10
Should be VIP'D

[Fred-R]

I'm also looking for some advice on the wheel choice, I'm looking at 18x10 + 18. Would anyone be able to let me know if rolling the guard will be required and preferably what the best tire size would be?

I'm also looking for that exact same size and the exact same question on my BNR32?? I don't want to roll or pull the fenders. I'm a lil scared it will rub on front when turning... Should I go with +20 offset? and what tires should I go with? Not the brand, the size...

[caliber676]

I'm waiting for 18x9.5 +18 to get in, should be here in the next couple weeks. I'll give you a reply when I get them so you have a rough estimate of what you'll be dealing with using 10" wide

[Fred-R]

yeah thanks, but i will need a quick reply on this one, like monday or so...