Tweet
OK and now the continuation of my other light bulb replacement threads:
How To: Change The Climate Control Bulbs
How To: Change The Bulbs Above Your Steering Wheel
Welcome to "How To: Change The Power Window Switch Light Bulb"
Remove the Power window switch assembly using a thin dull tool like a butter knife. Insert under the front edge of the switch assembly (the side closest to the hinge on the door) pressing towards non hinge side of the door. There is a little metal clip that springs back. As you do this pull up and it should come out pretty easily.
Take out the 4 screws that hold the window switches in and pull the assembly out.
Now the hard part. The white plastic piece on the back of the switch assembly comes off. There are 4 tabs per side. Only the middle two per side have to be pressed in. I managed it on my own without breaking it but be patient or get help because it's not easy. Once the piece comes off you will see a brown plastic screw in the middle of the circuit board, that is the bulb assembly. Turn it 1/4 turn and pull it out. Change the bulbs with the same Source 2721092's as we used in the How To: Change The Bulbs Above Your Steering Wheel post http://www.thesourcecc.com/estore/pr...roduct=2721092.
There is no trick to putting to back together. Just snap, screw and pop it back in the door.
How To: Change The Climate Control Bulbs
How To: Change The Bulbs Above Your Steering Wheel
Welcome to "How To: Change The Power Window Switch Light Bulb"
Remove the Power window switch assembly using a thin dull tool like a butter knife. Insert under the front edge of the switch assembly (the side closest to the hinge on the door) pressing towards non hinge side of the door. There is a little metal clip that springs back. As you do this pull up and it should come out pretty easily.
Take out the 4 screws that hold the window switches in and pull the assembly out.
Now the hard part. The white plastic piece on the back of the switch assembly comes off. There are 4 tabs per side. Only the middle two per side have to be pressed in. I managed it on my own without breaking it but be patient or get help because it's not easy. Once the piece comes off you will see a brown plastic screw in the middle of the circuit board, that is the bulb assembly. Turn it 1/4 turn and pull it out. Change the bulbs with the same Source 2721092's as we used in the How To: Change The Bulbs Above Your Steering Wheel post http://www.thesourcecc.com/estore/pr...roduct=2721092.
There is no trick to putting to back together. Just snap, screw and pop it back in the door.
Comment