Announcement

Collapse
No announcement yet.

Project Modworks Monster R32 GTR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    I'd bet money on lean air/fuel ratio.

    Check MAFs and O2 sensors.
    oh hai!

    Comment


    • #17
      Originally posted by r32_nate View Post
      It's all stock. No pfc.
      Sorry. I'm confused by what you said above.

      WHAT I HAVE

      - 750cc Denso Injectors
      - Apexi Power FC L-Jetro
      - Dual HKS BOV
      - Greddy Y Pipe
      - Front Mount Intercooler
      - PFC Serial to USB Cable
      Disregard. I reread and realized the above parts aren't installed yet.
      Last edited by bobbo; 05-30-2014, 04:07 PM.

      Comment


      • #18
        Originally posted by bobbo View Post
        Sorry. I'm confused by what you said above.



        Disregard. I reread and realized the above parts aren't installed yet.

        Yea sorry my bad, those are not installed. Its mostly stock unitl its running right, then Im gonna mod. When u say check MAF and O2, u mean clean or is their a way to test? Is this a common occurance?
        1992 BNR32 Skyline
        285hp / 220tq @ 15.5PSI On Mustang Dyno 2014-09-22


        Current Build:
        Precision 6264 Turbo 1.00A/R
        Tomei PonCam Type B
        Manley Titanium Valvetrain
        CP Pistons / Manley Rods
        Supertec Spline Drive Oil Gears/Drive
        N1 water pump / N1 Oil Pump
        Haltech Platnium Pro
        AEM Water/Menthanol
        Tomei FPR
        Exedy Hyper Twin Clutch

        May 9th, 2015 made 408whp @ 9PSI


        Build Thread
        http://forums.gtrcanada.com/gt-r-project-cars/62483-project-modworks-monster-r32-gtr-16.html

        Comment


        • #19
          So I bought a new one of these http://www.wiringspecialties.com/wisprbcohabr1.html RB26DETT coil pack harness since mine is destroyed from heat and age. Also new plugs should be here tomorrow. I just ordered all my single turbo stuff, and still need a FC Datalogit. Unfortunately my buddies FD RX-7 popped on the way home yesterday and that's in my garage now for a few weeks, so this might now get many updates for a bit haha.
          1992 BNR32 Skyline
          285hp / 220tq @ 15.5PSI On Mustang Dyno 2014-09-22


          Current Build:
          Precision 6264 Turbo 1.00A/R
          Tomei PonCam Type B
          Manley Titanium Valvetrain
          CP Pistons / Manley Rods
          Supertec Spline Drive Oil Gears/Drive
          N1 water pump / N1 Oil Pump
          Haltech Platnium Pro
          AEM Water/Menthanol
          Tomei FPR
          Exedy Hyper Twin Clutch

          May 9th, 2015 made 408whp @ 9PSI


          Build Thread
          http://forums.gtrcanada.com/gt-r-project-cars/62483-project-modworks-monster-r32-gtr-16.html

          Comment


          • #20
            Sweet looking car!

            Comment


            • #21
              Looks like a lot of potential in this build.
              Good call by the way on the WS RB harness. The high temp loom cover will keep the new one from frying.

              Comment


              • #22
                Yea the harness is awesome. unfortunately it didnt fix my issue. its "bucking" or cutting out multiple times in boost. feels like once ur in boost, you just keep taking your foot in and out of the gas pedal. i dunno if its fuel pump related or a boost leak? im just gonna replace everything with the stuff i have on order, starting with fuel pump, then move to the intake stuff.... unless anyone else has any ideas.

                so far i have:
                replaced coil pack harness
                tested and replaced any bad coils
                new plugs
                cleaned maf
                visually checked all intake joints for leaks

                im wondering if maybe i have a vacuum line mixed up causing this. not sure. anyone have a walk through or can post up where each vac line should be coming from and going to?
                1992 BNR32 Skyline
                285hp / 220tq @ 15.5PSI On Mustang Dyno 2014-09-22


                Current Build:
                Precision 6264 Turbo 1.00A/R
                Tomei PonCam Type B
                Manley Titanium Valvetrain
                CP Pistons / Manley Rods
                Supertec Spline Drive Oil Gears/Drive
                N1 water pump / N1 Oil Pump
                Haltech Platnium Pro
                AEM Water/Menthanol
                Tomei FPR
                Exedy Hyper Twin Clutch

                May 9th, 2015 made 408whp @ 9PSI


                Build Thread
                http://forums.gtrcanada.com/gt-r-project-cars/62483-project-modworks-monster-r32-gtr-16.html

                Comment


                • #23
                  Here's a service manual posted by DarkCorporaL:

                  Comment


                  • #24
                    Have you verified the ignitor is good? Mine did the same once the car got warmed up. As soon as it came on boost I'd get a misfire.

                    Comment


                    • #25
                      Solid thread! Keep it up. I had a similar issue. When I replaced my fuel pump with a nismo pump and new fuel filter it solved my issue of sputtering.

                      Comment


                      • #26
                        x2 for the ignitor.

                        Great build BTW
                        Pistol packin Monkey drinkin no money bum

                        Comment


                        • #27
                          hey come take me for a spin, my r32 gtr started doing something similar, replaced cas and a ton of other chit before i found a broken injector clip. the injector when at high rpm would rattle around and do the same thing.
                          1989 Gts-T Sold

                          1992 GT-R Sold

                          1991 Gts-T Sold

                          1989 Gts-T Sold

                          1992 GT-R What did i get myself into again...

                          Comment


                          • #28
                            LOL I do have a injector missing the metal clip on the electrical connector and is held on otherwise, never really thought about that at high RPM, but it doesnt seem like thats the issue, its not a quick misfire, this is a big profound bucking that makes your whole body move, more like "fuel cut" in some cars, no noises or bangs or anything, but once its in boost, especially in fourth or fifth, it does it. The car isnt really derivable on the highway because of this, it snot only WOT, its just worse then and more profound.

                            I am away for the weekend to Hali, but when Im home Sunday I would love to come take u for a drive, if you are familiar with this platform, because thats what I need. I feel like their is a good chance I have a vacuum line not hooked up, or mixed up with another.
                            1992 BNR32 Skyline
                            285hp / 220tq @ 15.5PSI On Mustang Dyno 2014-09-22


                            Current Build:
                            Precision 6264 Turbo 1.00A/R
                            Tomei PonCam Type B
                            Manley Titanium Valvetrain
                            CP Pistons / Manley Rods
                            Supertec Spline Drive Oil Gears/Drive
                            N1 water pump / N1 Oil Pump
                            Haltech Platnium Pro
                            AEM Water/Menthanol
                            Tomei FPR
                            Exedy Hyper Twin Clutch

                            May 9th, 2015 made 408whp @ 9PSI


                            Build Thread
                            http://forums.gtrcanada.com/gt-r-project-cars/62483-project-modworks-monster-r32-gtr-16.html

                            Comment


                            • #29
                              Originally posted by GTS-James View Post
                              hey come take me for a spin, my r32 gtr started doing something similar, replaced cas and a ton of other chit before i found a broken injector clip. the injector when at high rpm would rattle around and do the same thing.
                              PM me your phone number, Ill text you when im out of the gym. Maybe if your free tonight even
                              1992 BNR32 Skyline
                              285hp / 220tq @ 15.5PSI On Mustang Dyno 2014-09-22


                              Current Build:
                              Precision 6264 Turbo 1.00A/R
                              Tomei PonCam Type B
                              Manley Titanium Valvetrain
                              CP Pistons / Manley Rods
                              Supertec Spline Drive Oil Gears/Drive
                              N1 water pump / N1 Oil Pump
                              Haltech Platnium Pro
                              AEM Water/Menthanol
                              Tomei FPR
                              Exedy Hyper Twin Clutch

                              May 9th, 2015 made 408whp @ 9PSI


                              Build Thread
                              http://forums.gtrcanada.com/gt-r-project-cars/62483-project-modworks-monster-r32-gtr-16.html

                              Comment


                              • #30
                                Okay so I found two hose nipples that had nothing attached, so I connected them, (near the FPR) together, and it took about 1/2 the bucking issue away. Its still there tho, and now it makes a loud "pop" from the exhaust from time to time, like a backfire.
                                1992 BNR32 Skyline
                                285hp / 220tq @ 15.5PSI On Mustang Dyno 2014-09-22


                                Current Build:
                                Precision 6264 Turbo 1.00A/R
                                Tomei PonCam Type B
                                Manley Titanium Valvetrain
                                CP Pistons / Manley Rods
                                Supertec Spline Drive Oil Gears/Drive
                                N1 water pump / N1 Oil Pump
                                Haltech Platnium Pro
                                AEM Water/Menthanol
                                Tomei FPR
                                Exedy Hyper Twin Clutch

                                May 9th, 2015 made 408whp @ 9PSI


                                Build Thread
                                http://forums.gtrcanada.com/gt-r-project-cars/62483-project-modworks-monster-r32-gtr-16.html

                                Comment

                                Working...
                                X