Ken's 1989 BabyZilla

[Voodoo_ChildR32]

Glad to see ya made it back bud! Quite the build ya got goin on, I'm all jealous now, lol.

[TheyKilledKenny]

Im jealous that you got a bunch of stuff that you wanted done finished on yours, while my stuff sits in the box lol. We'll have to out and grab a beer one of these nights.

[TheyKilledKenny]

Ordered my GTX3071R with a 0.63 A/R turbine housing.



I LIKE TO GO FAST

[Supraclean]

Nice man did you get Vband flange housing or 4bolt?

Sent from my BlackBerry 9700 using Tapatalk

[TheyKilledKenny]

I got the V-Band's, seems like a easier/better setup than some bolts that will seize up. Now Im just waiting on my manifold to come in so I can figure out what style/size of wastegates I want to use.

[Supraclean]

Nice man, you went twin scroll I take it. I Bet 2 44mm Tials would do the trick. Some good custom work to fit it by the cross member.

Are you going to plum them back in or double screamers:P?

Sent from my BlackBerry 9700 using Tapatalk

[TheyKilledKenny]

I was thinking of going with 38's, I doubt Id get the full use of the 44's. I havent decided if Ill go with screamers or not, I guess it depends on if the neighbours piss me off or not lol. Still debating on the Nistune or ViPec though. An oil cooler with thermostat sandwich plate wouldnt hurt either.

[Supraclean]

good call on the Oil cooler+thermostat. Id say run a Vipec man, Cam a lightspeed can tune it quick for ya. Why limit yourself, im not saying theres anything wrong with nistune, its just in our area it best to choose what or tuners use. Aka Vipec threw cam, or Hks threw Reg at RCTS.

[TheyKilledKenny]

More parts coming

1 x Defi Blue Racer 2 3/8” (60mm) Gauge Exhaust Temp

2 x Defi Blue Racer 2 3/8” (60mm) Gauge Temp (Metric)

1 x Defi Blue Racer 2 3/8” (60mm) Gauge Turbo Boost

1 x Defi Blue Racer 2 3/8” (60mm) Gauge Pressure

[TheyKilledKenny]

I put together my own oil cooler kit for about 500 beans.

1x SETRAB. 25 Row Cooler . 8.25" overall width . 6.5" body width . 7.5" tall . 2" thick.


2x SETRAB Oil Cooler Adapter. 22mm x 1.5 to -10AN.


1x Greddy Engine Oil Block Adapter 3/4 x 16UNF -10AN Fittings


2x Greddy M18 Thread 1/8 PT Sensor Gauge Adapter


2x Earl's Swivel-Seal Straight Hose End -10AN


2x Earl's Swivel-Seal 90 deg. Low Profile Hose End -10AN


7 Feet of Earl's Perform-O-Flex Hose -10AN

[TheyKilledKenny]

I also ordered a steel exhaust manifold gasket, and a steel T3 turbo manifold inlet gasket.

I picked up a set of OEM headlights, I might replace my painted red ones.

Lastly I have a Bee*R rev limiter now


Oh I forgot to mention that AGP was having a hard time finding a .63 A/R V-Band turbine housing, the only one they had was already ceramic coated. They are sending me the coated housing for no additional cost.

[Supraclean]

Good choice on Serab cooler! I have one to pul on aswell.

Lucky deal on the housing! I'm jelly.

Sent from my BlackBerry 9700 using Tapatalk

[r33_gtst]

You are gonna love the bee*R
I've had it two years, dont abuse it and it's been great
Spittin flames at 7krpm at night always looks and sounds awesome

[Voodoo_ChildR32]

Lastly I have a Bee*R rev limiter now


.

Now I'm REALLY JEALOUS!!! lol.
Nice! Although, I have something up my sleeve that'll even the score, muahhahahah! When we gonna grab a brew? Maybe this weekend? I'll PM ya my cell.

[TheyKilledKenny]

Im pretty stoked for this summer, this will be the year I getr done. Im still waiting for most of the stuff to come in though

I sent you a PM James, Ill text ya on thursday or early friday.