GTR Wheel Fitment Thread

[snatch]

Car looks sick!

[danceofcurse]

Model:BNR32
Wheel Brand/model: Rays TE37
Size:18x9.5
Offset:+22
Tire Size:245/40/18
Tire Brand/model:dunlop direzza dz101 rt615's waiting to go on
Fender/body work:none
Picture:



I cant fit more the 1/2 my finger in the rear fender. in the front its the lowest it can go without super rub, it only rubs when max turning happens

[bignate]

Model:BNR32
Wheel Brand/model: Rays TE37
Size:18x9.5
Offset:+22
Tire Size:245/40/18
Tire Brand/model:dunlop direzza dz101 rt615's waiting to go on
Fender/body work:none
Picture:



I cant fit more the 1/2 my finger in the rear fender. in the front its the lowest it can go without super rub, it only rubs when max turning happens

wow how much rear camber are you running? Thats gonna eat tires.

[danceofcurse]

its even wear on the tires, it may be the angle, the front tire is turned a bit but the camber is killer for sure, on the outsides theres a lil bit of tread left on the insides theres good ole steel showing, i have rt615's to put on though just havnt had the chance im in the middle of a move!

[Hwood]

Model:BNR32
Wheel Brand/model: MB Battle
Size:18x9.5
Offset:+17
Tire Size:275/40/17
Tire Brand/model:Falken Azenis 615
Fender/body work:Rear Fenders Rolled - Dropped on Cusco C/O's

[DougTaylor]

Stagger question

I'm getting some 18x9.5 +20 wheels and I'm trying to decide which tires to fit. I think I'm almost settled on 265/35 all around but I'm considering a stagger with 275/35 in the back and 245/40 in the front. I know different diameters is bad for the transfer case and attessa freaks out, but is there a safe limit? This combination is only about 3.5 mm different is I thought it might be ok.. Any comments on the 265/35 (rubbing in the front?) or the stagger?

Thanks
Doug

[Kras]

I'm getting some 18x9.5 +20 wheels and I'm trying to decide which tires to fit. I think I'm almost settled on 265/35 all around but I'm considering a stagger with 275/35 in the back and 245/40 in the front. I know different diameters is bad for the transfer case and attessa freaks out, but is there a safe limit? This combination is only about 3.5 mm different is I thought it might be ok.. Any comments on the 265/35 (rubbing in the front?) or the stagger?

Thanks
Doug

Don't stagger a GTR.

[Dragon Humper]

BS

If the tire dia. is the same you will have no issues. I will be running 245/45's up front and 275/40's in the back at a height of 25.7".

If the fronts are shorter than the back (ie: 25" front and 25.7" rear) then the ATESSA will just come in a little later than normal.
You won't have the transfer case issues that everyone is afraid of.



Jon.

[mcfly]

When atessa does come in though and your tires are not the same rolling diameter you will be putting a huge strain on your drivetrain.

I'm with Kras, you're an idiot if you stagger a gtr simple because there is zero need to and secondly because you are bound to put more wear on your system.

[bignate]

Stagger on any AWD car is bad news, just dont do. Its been said so many times. That said as long as the OD is the same front and back there will be no issues.

[DJ]

Wheelssss

Model: BNR32
Wheel Brand/model: Work, RSZ-R
Size: 17x9
Offset: +18
Tire Size: 275/40/17
Tire Brand/model: Falken Azenis Rt 615
Fender/body work: None
Picture:

[mcfrank69]

Model: SKYLINE GTR R32.4
Wheel Brand/model:GERMANY
Size: 18''
Offset: 12 INCH
Tire Size: FRONT TIRE 235/40zr rear 275/40 ZR all streched
Tire Brand/model: falken
Fender/body work:
Picture:
i can show you some picture because a i'm a new

[LuckyGTR]

Model: SKYLINE GTR R32.4
Wheel Brand/model:GERMANY
Size: 18''
Offset: 12 INCH
Tire Size: FRONT TIRE 235/40zr rear 275/40 ZR all streched
Tire Brand/model: falken
Fender/body work:
Picture:
i can show you some picture because a i'm a new

uh 12 inch offset???

[LuckyGTR]

I HAVE A QUESTION

SOME LITTLE DUDE ON ANOTHER FORUM TELLING ME THAT

STAGERED WHEELS WOONT BE BAD FOR THE AWD SYSTEM ON THE GTR

I THINK I READ SOMEWHERE IN HERE THAT

STAGERED WHEELS ON GTR AINT GOOD

HES TELLING ME DOSENT MATHER

SOMEONE HELP!

[SKYGTR]

Model: BNR32
Wheel Brand/model: Work, VS-KF
Size: 18x11 Offset +7 tire Dunlop DZ-101 Size 265/35/18
Size: 18x10 Offset +7 tire Dunlop DZ-101 Size 255/35/18
Wheels spacer 15mm
Fender/body to do

http://www.monchar.com/image.php?id=523868&f=523900/

http://www.monchar.com/image.php?id=524148&f=524200/