The problem with that place, was they called themselves TSS and because they had Skyline in the name everyone though that they must know it all. So if I go by that I should start a shop called "The Ferrari, Porsche and Lamborghini Shop" and it means I know what I'm doing? Not so much.
Announcement
Collapse
No announcement yet.
What happened to TSS?
Collapse
X
-
Originally posted by Brody_Howell View PostBut I do know that ForcedFed doesn't carry a lot of parts,1990 GTS-4 soon to have rb25det
239hp@14 psi stock turbo
Drift or die tryin...8)
WTB *AWD* RB25DE BLOCK ONLY PM
Comment
-
well my car came from TSS..i've called them a few times and alicia sounded super hot..but as for help i only needed electrical schematics as i live in ontario and can't really bring my car across canada every time i need something done..but i work at kal tire here and my techs are awesome. as for items i need i just order them through my shop at cost. any problems i have i just come here as for turning..i KNOW my car wasn't turned properly so i'll have to head to toronto to dyno tune the ECU after i complete my engine mods.
Comment
-
It is about time TSS is shut down. We sued them due to not completing a project we paid them up front to finish over 2 years and also for the theft of our odometer. As far as I'm concerned they should be in jail for fraud right now. Little do they know but we are not through with them yet.It's better to burn out then to fade away
Comment
-
Originally posted by theDOM View Post.i've called them a few times and alicia sounded super hot
my car also came from tss, although i never delt with them that much, nor did i buy parts cause i got burned on the price of the car by like 3-4k1990 GTS-4 soon to have rb25det
239hp@14 psi stock turbo
Drift or die tryin...8)
WTB *AWD* RB25DE BLOCK ONLY PM
Comment
-
MotherF***er...
Steve DEMANDED I pay for the "waranty" repairs on my car after they were done, or he would place a lean on it. I payed, and didn't drive my car more than a months worth in the entire last year. I just had Ztune look over the car (and they still are) and it looks like the engine is fubar! I call Steve for the first time in a year to ask "What the hell man?!" and they are out of business?! AAARRRRRRRRRGGGGGGGHHHHHHHHHHH!!!!!!!!
TSS built my engine TWICE, and not once got the wiring or tuning right. They left loose parts, wires, even a couple tools in my car, and under the hood. I guess I shouldn't be too surprised it's pooched again.
On a personal note.. I dearly hope I had some hand in directing business away from him. I am also glad to hear that Steve will not be in the skyline community anymore. Someone finally nailed his ass down, and beat the ******** out of it.
Alicia, Chad, and Ian.. They always seemed to be trying their best under the conditions put upon them. I have no doubt they will all do better, and be more appreciated wherever they go next.
Steve however...
Comment
-
Originally posted by DRIFT4LIFE View Postdepends what you are looking for. Nissan parts there, are owned by me and dusty mostly,and anything can be ordered by anyone. anything cant be made by just anyone ,dusty can make almost anything, fuel rails to strut towers to intake plenums. aluminum to titanium. only parts forcefed has in abundance are obviously rx7 parts,some by the dozens. 2j,1j stuff too.White 1990 Nissan Skyline HCR32.
"Skyline" Is a lifestyle.
Comment
-
Great news.. my luck is actually good concerning this car for once!
When Z-tune scoped the cylinder it LOOKED bad, but fortunately it was superficial. That leaves the head.. it is being sent for testing now.
In other news.. TSS incorrectly surfaced my block and head. It's fine for a stock headgasket, but not up to par for any metal ones.
The Z-Tune team has been very helpfull, and I may finally get to drive my car again!!
Comment
-
Originally posted by Brody_Howell View PostWell yeah, i know you guys are like Fabricating gods there but i mean its not so much like TSS where you can straight up just gets parts for Nissans because well.. its not so much oriented towards Skylines etc.. More like Supras and Rotangs. But i like Forced Fed. Been there a couple times with my friend carter and you all seem pretty cool.1990 GTS-4 soon to have rb25det
239hp@14 psi stock turbo
Drift or die tryin...8)
WTB *AWD* RB25DE BLOCK ONLY PM
Comment
-
"We"
Do you work there? Edit: I see above that you do
I was in the other day for the first time.
Its a nice shop. Marko was a pretty nice guy, he showed me around, let me have a look at the borgwarner supra. Junk is siiiiiiiiiiiiiiiick
Ian from TSS fixed my clutch when I was in.
Hopefully someone contacts steve and scoops up the loads of parts that TSS had.
on a side note: when I was in the shop there was a datsun rocking a sick set of work meister s1's.
I thought mine were wide at 11.5 those suckers had MASSSIVE dish.
Respect
Originally posted by Oakvillethat, is what us oakvillians like to call an 'instabone'
Comment
-
yes that is dusty's car and yeah they are sick that pic was taken a while ago, he has R888 all round on those miesters now.
you should bring your gtr down one day i would love to see it in person.1990 GTS-4 soon to have rb25det
239hp@14 psi stock turbo
Drift or die tryin...8)
WTB *AWD* RB25DE BLOCK ONLY PM
Comment
-
Originally posted by DRIFT4LIFE View Postwe did have a 350 rwhp gtr at like 14 psi in for a dyno run and some other things funny thing is that the engine was alll stock, but the boost restricter removed only intake and exhaust....not too shabby
I think it's got a bit more than just intake/exhaust and boost restrictor removed...those dyno numbers seem a little "optimistic"FINAL CLEARANCE! EVERYTHING MUST GO NOW!
The Best Brands. The Best Builds. The Best Service. The Best Prices.
- 1.888.ZED.TUNE
Comment
Comment