Wheel fitment thread.

[VRsex]

Also, what is the center bore on the stock wheel? Aka the Hubcentric measurment

[VRsex]

slow forum

[mcfly]

66.06mm is the hub

[bignate]

I plan on running 17x9.5 f 17x11r, will I have any issues, offest if ls 20f and 12R

17x11 in the back of a gts-t is pretty ambitious. Not sure if it will fit or not but its gonna take some fender raping for sure.

[mcfly]

with a +12, oh yes:-P
and maybe some 225's on those 11's haha.

[VRsex]

thanks for the center bore

And the only reason I'd go wit 11's is because i've been reading, and I can get the wheels in 17x8.5f and 17x9.5r, would that be ok? not too skinny in the front? and yes, I'll be stretching rubber over them

[VRsex]

this is my current setup on my current car, the GTST isn't in my possesion yet



16x8.5f and 16x9.5r 1985 chevy corvette wheels, 205/40 front and 215/40 rear

final ET of 23f and 17r, thats on a vw though, I think it sits nice, thats before my fenders were rolled and the car was lowered.

i've been reading that ET 15-20 is desired on the skylines, any info?

[mcfly]

you can use any offset you want on a skyline, same as any car.

look at jvd's car. he has a 10 on the rear and it already taking advantage of some poke and stretch. A 11 with a +12 will be way out there.

compare with this interactive spread sheet.

http://www.gtrpwr.com/filedb/download.php?file=41

[rak123]

17x9+30 fits all around nicely depending on tire.

oem r33 gtr rims

is that on the gtst? you don't need any fender rolling or anything you just dropped em on and rolled?

[VRsex]

you can use any offset you want on a skyline, same as any car.

look at jvd's car. he has a 10 on the rear and it already taking advantage of some poke and stretch. A 11 with a +12 will be way out there.

compare with this interactive spread sheet.
http://www.gtrpwr.com/filedb/download.php?file=41

I didnt know the actual offset off the wheel, so that was just a random number, so I'd ideally like to run the 9.5r with an ET of 17ish?

[VRsex]

Just ran over JVD's specs, I think I found the answers i'm looking for thanks for the help! I'll keep you posted when its all together!

[mcfly]

is that on the gtst? you don't need any fender rolling or anything you just dropped em on and rolled?

no you need to roll fenders

[BurlyR32]

17x9 +20 235/40ZR17 Yokohama S-Drives

[VRsex]

^^ specs? offset?

[BurlyR32]

17x9 +20, 235/40ZR17, fronts will be the same.


Thanks for the excel program mcfly.